• Stainless Steel Shim Stock, Unpolished (Mill) Finish, Full Hard Temper, 0.012" Thickness, 6" Width, 50" Length

    Precision Brand Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.

    • Brand: Small Parts
    • ASIN: B0002FSV86
    • UPC: 698158223404

  • 303 Stainless Steel Round Rod, Unpolished (Mill) Finish, ASTM A582, 13/16" Diameter, 12" Length

    The 303 stainless steel round rod has an unpolished (mill) surface, has been annealed, meets American Society for Testing and Materials International ASTM A582 specifications, and has a standard tolerance. The 303 stainless steel grade offers better machinability than general-purpose 304 stainless steel with slightly less corrosion resistance. An austenitic stainless steel, 303 is typically nonmagnetic and can be cold worked to increase its hardness and strength while maintaining most of its formability. The material has been annealed, a method of heating and cooling metal to modify its properties, such as increasing its formability and toughness or decreasing its strength, after it has been shaped.Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Duplex grades are heat treatable and roughly twice as st...

    • Brand: Small Parts
    • ASIN: B0069A4SB2

  • 302 Stainless Steel Sheet, Unpolished (Mill) Finish, Full Hard Temper, 0.001-0.020" Thickness, 6" Width, 12" Length (Pack of 8)

    Precision Brand Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.

    • Brand: Small Parts
    • ASIN: B002BX3USS
    • UPC: 698158224456

  • Fletchers' Mill Federal Pepper Mill, Cinnabar - 8 Inch, Adjustable Coarseness Fine to Coarse, MADE IN U.S.A.

    The Fletchers’ Mill Federal Pepper Mill is tradition at its best. This classically styled mill combines good looks with modern technology. Fletchers’ Mill grinders give them precise control through a patented Lock and Grind grinding system. This unique mechanism ensures perfect consistency - whether fine grinds for fish, medium grinds for gravies or coarse grinds for meats. Grinding is performed in a two-step process: first the peppercorns are crushed to release their natural oils and flavors; next, they are ground to the chosen consistency for perfect results every time. And all mills feature pop-out mechanisms for easy cleaning. Built for exacting chefs who want and need complete control over the seasoning of their dishes. All Fletchers’ wood products are handcrafted in New Vineyard, with American hardwoods, and carry a lifetime guarantee. Outstanding quality, unique design. "From raw logs to the finished product the entire process is done in-house and under a watchful eye. That is why the Fletchers are proud to say Made in Maine, Guaranteed for Life." -Doug Fletcher

    • Color: Cinnabar
    • Brand: Fletchers Mill
    • ASIN: B00E89TZ7S
    • UPC: 819936019365

  • 304 Stainless Steel Flat Expanded Sheet, Unpolished (Mill) Finish, 48" Width, 48" Length, 0.50" SWD x 1.26" LWD Opening, 18 Gauge

    The 304 stainless steel expanded sheet has a flat, unpolished (mill) surface. The 304 stainless steel grade provides good strength and weldability, and is resistant to corrosion. It is typically nonmagnetic. The flat sheet has been rolled for a smooth, level surface.Expanded metal sheets are created by slitting and cold-forming metal as it expands in a press. This process creates diamond-shaped openings that are nominally measured the long way of the diamond (LWD) and the short way of the diamond (SWD). Raised, or standard, expanded sheets offer a skid-resistant surface and a high strength-to-weight ratio. Flat expanded sheets have been rolled for a smooth, level surface. Expanded metal sheets are measured by the percentage of open area, which is the ratio of open space to total space in a given area. A sheet with a larger percentage of open area contains less material than one with a smaller percentage.

    • Brand: Small Parts
    • ASIN: B003DKJI7K

  • 316 Stainless Steel Sheet, Unpolished (Mill) Finish, Annealed, ASTM A240, 1/4" Thick, 12" Width, 12" Length

    The 316 stainless steel sheet has an unpolished (mill) surface, has been annealed, and meets American Society for Testing and Materials International ASTM A240 specifications. The 316 stainless steel grade provides better corrosion resistance than general-purpose 304 stainless steel, especially in marine environments, due to higher nickel content and the addition of molybdenum. An austenitic stainless steel, 316 is typically nonmagnetic and can be cold worked to increase its hardness and strength while maintaining most of its formability. The material has been annealed to modify its properties after shaping.Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. The ferritic class contains moderately formable and corrosion-resi...

    • Brand: Small Parts
    • ASIN: B00D7OL1AE

  • .750 inch 304 Stainless Steel 12" X 12" Plate, Mill Finish

    304 / 304L stainless steel is a common commercial alloy. High corrosion resistance. High strength. Easily formed, rolled, machined, or welded. Non magnetic. 304 is used in industrial, architectural, and food service applications. Note: Stainless steel plate products from the mill are raw and unpolished. They often contain pits, minor rust spots, pen markings, and scratches due to the handling process (none are acceptable reasons for return). Printed material test reports (MTR's) for each plate are included in the box. Caution; heavy, sharp edges from cutting process, handle with care.

    • Brand: IRCwaterjet
    • ASIN: B07NX188GF

  • 321 Stainless Steel Foil, Unpolished (Mill) Finish, backing_type Temper, 0.002" Thickness, 12" Width, 100' Length

    The 321 stainless steel foil has an unpolished (mill) surface and a standard tolerance. The 321 stainless steel grade includes titanium for corrosion resistance in high temperatures. An austenitic stainless steel, it is typically nonmagnetic.Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated.Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Magnetism characterizes how much the material is repelled by or attracted to a magnet.

    • Color: Silver
    • Brand: Small Parts
    • ASIN: B002A5SSZW
    • UPC: 698158204106

  • 321 Stainless Steel Foil, Unpolished (Mill) Finish, backing_type Temper, AMS 5510/ASTM A240/ASTM A167, 0.002" Thickness, 10" Width, 50' Length

    The 321 stainless steel foil has an unpolished (mill) surface, meets SAE Aerospace Material Specifications AMS 5510 and American Society for Testing and Materials International ASTM A240 and ASTM A167 specifications, and has a standard tolerance. The 321 stainless steel grade includes titanium for corrosion resistance in high temperatures. An austenitic stainless steel, it is typically nonmagnetic.Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated.Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Magnetism characterizes how much the material is repelled by or attracted to a magnet.

    • Brand: Small Parts
    • ASIN: B004W3L5M8
    • UPC: 698158202256

  • Eagle 1-26 Gauge 5 Foot Rain Diverter - Nails and Instructions Included (Mill Finish Aluminum, Copper, Galvanized, Stainless Steel & More) (Single Brown)

    EAGLE 1 in Diverters are high quality and come in multiple colors. Features:- High quality- Great to keep the roof water from pouring on your doorways.- 4 free stainless steel nails included- Install the diverter by simply sliding the 7 inch side under the the shingle tabs and fasten with the free stainless steel nails.- The diverter will redirect the roof water away from your doorway or other area of concern.- Often used above doors, windows, chimneys, pipes, roof vents, or anything you want to reduce the volume of water from reaching.- Suggested installation instructions will be included in your package.- Please feel free to contact us with any questions you have and we will help you with your project. At Eagle 1 we stand behind all of our products! Thank you for shopping. We know you will like our Rain Diverters! Buy with confidence!

    • Color: Brown
    • Brand: Eagle 1
    • ASIN: B07FN4HXL9
    • UPC: 680487974133

  • JumpingBolt 16ga Stainless Steel 2B Mill Finish 316 Sheet Plate 12" x 24" Material May Have Surface Scratches

    metal sheets for of crafts crafting gold jewelry thin craft tin perforated with corrugated steel art etching x adhesive foil making silhouette thick magnetic gauge magnets decorative bbqsilverm grill cut clay

    • Brand: JumpingBolt
    • ASIN: B07QGHCV4K
    • UPC: 747867496613

  • 304 Stainless Steel Wire, Unpolished (Mill) Finish, Spring Temper, Precision Tolerance, ASTM A313, 0.032" Diameter, 60" Length (Pack of 10)

    The 304 stainless steel wire has a spring temper, an unpolished (mill) finish, and a precision tolerance, and meets American Society for Testing and Materials International ASTM A313 specifications. The 304 stainless steel grade is a general-purpose material that combines corrosion resistance, weldability, and formability, making it the most commonly used grade of stainless steel. The material may be slightly magnetic and can be cold worked for increased strength and rigidity. The spring temper is stiff and spring like, resisting bends and kinks until a large amount of force is applied.Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated.Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Toughness ...

    • Brand: Small Parts
    • ASIN: B001385IFU

  • 304 Stainless Steel Strip, Unpolished (Mill) Finish, Annealed, ASTM A240/AMS 5513, 1/2" Thick, 3" Width, 6" Length

    The 304 stainless steel strip has an unpolished (mill) surface, has been annealed, and meets American Society for Testing and Materials International ASTM A240 and SAE Aerospace Material Specifications AMS 5513 standards. The 304 stainless steel grade is a general-purpose material that combines corrosion resistance, weldability, and formability, making it the most commonly used grade of stainless steel. An austenitic stainless steel that is one of the 18-8 grades, 304 can be cold worked to increase its hardness and strength while maintaining most of its formability. The material is typically nonmagnetic but may become slightly magnetic when cold worked. It has been annealed to modify its properties after shaping.Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Duplex grades are heat treatable and rough...

    • Brand: Small Parts
    • ASIN: B00D7O8L2A

  • 304 Stainless Steel Woven Mesh Sheet, Unpolished (Mill) Finish, ASTM E2016-06, 12" Width, 12" Length, 0.01" Wire Diameter, 36% Open Area

    The 304 stainless steel mesh sheet is woven, meets American Society for Testing and Materials International ASTM E2016-06 specifications, and has an unpolished (mill) surface and a standard tolerance. The 304 stainless steel grade provides good strength and weldability, and is resistant to corrosion. It is typically nonmagnetic. The wire strands are woven to create a flexible mesh sheet.Mesh sheets, also called wire cloth, are created by connecting metal wire strands to form a sheet. Open space between the wire strands makes mesh sheets flexible and useable as a strainer or a sieve. Many mesh sheets are woven and flexible, and may have crimps to provide a uniform opening size and additional strength. Others are welded to form a more rigid sheet that maintains a uniform opening size and will not fray after cutting. The size of a mesh pattern is expressed as the number of openings per inch in horizontal and vertical directions. For example, a 4 x 4 mesh pattern has four openings per inch in each direction (16 openings per square inch). For the same mesh pattern size, a sheet with a smaller wire diameter is more flexible and permits larger particles to pass through than mesh with a larger wire diameter.

    • Brand: Small Parts
    • ASIN: B005H3D3TA

  • 18-8 Stainless Steel Round Shim, Unpolished (Mill) Finish, Annealed, Hard Temper, ASTM A666, 0.075" Thickness, 3/4" ID, 1-1/2" OD

    The 18-8 stainless steel round shim has an unpolished (mill) surface, meets American Society for Testing and Materials International ASTM A666 specifications, and has a standard tolerance. The 18-8 stainless steel material offers good resistance to corrosion and high temperatures. It may be slightly magnetic. Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. They also can be used to fill gaps between machine parts that are prone to wear. Shapes include round, notched, and slotted. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation.

    • Brand: Small Parts
    • ASIN: B006U23YPA

  • 316 Stainless Steel Round Shim, Unpolished (Mill) Finish, Annealed, Hard Temper, ASTM A666, 0.030" Thickness, 1-3/8" ID, 1-7/8" OD (Pack of 5)

    The 316 stainless steel round shim has an unpolished (mill) surface, meets American Society for Testing and Materials International ASTM A666 specifications, and has a standard tolerance. The 316 stainless steel grade provides better corrosion resistance than 304 stainless steel. It may be slightly magnetic. Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. They also can be used to fill gaps between machine parts that are prone to wear. Shapes include round, notched, and slotted. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation.

    • Brand: Small Parts
    • ASIN: B006U1HXTE

  • 304 Stainless Steel Woven Mesh Sheet, Unpolished (Mill) Finish, ASTM E2016-06, 12" Width, 12" Length, 0.0065" Wire Diameter, 65% Open Area

    The 304 stainless steel mesh sheet is woven, meets American Society for Testing and Materials International ASTM E2016-06 specifications, and has an unpolished (mill) surface and a standard tolerance. The 304 stainless steel grade provides good strength and weldability, and is resistant to corrosion. It is typically nonmagnetic. The wire strands are woven to create a flexible mesh sheet.Mesh sheets, also called wire cloth, are created by connecting metal wire strands to form a sheet. Open space between the wire strands makes mesh sheets flexible and useable as a strainer or a sieve. Many mesh sheets are woven and flexible, and may have crimps to provide a uniform opening size and additional strength. Others are welded to form a more rigid sheet that maintains a uniform opening size and will not fray after cutting. The size of a mesh pattern is expressed as the number of openings per inch in horizontal and vertical directions. For example, a 4 x 4 mesh pattern has four openings per inch in each direction (16 openings per square inch). For the same mesh pattern size, a sheet with a smaller wire diameter is more flexible and permits larger particles to pass through than mesh with a larger wire diameter.

    • Brand: Small Parts
    • ASIN: B005H3CLL6

  • 316 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, Annealed, 0 (Annealed) Temper, ASTM A276, 3/8" Thickness, 1-1/2" Width, 12" Length

    The 316 stainless steel rectangular bar has an unpolished (mill) surface, meets American Society for Testing and Materials International ASTM A276 specifications, and has a standard tolerance. The 316 stainless steel grade provides better corrosion resistance than general-purpose 304 stainless steel, especially in marine environments, due to higher nickel content and the addition of molybdenum. An austenitic stainless steel, 316 is typically nonmagnetic and can be cold worked to increase its hardness and strength while maintaining most of its formability.Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes...

    • Brand: Small Parts
    • ASIN: B000H9FTSW

  • 14ga Stainless Steel Plate, 12" x 24" Rectangle, 304 SS, 2B Mill Finish

    14ga Stainless Steel Plate, 12" x 24" Rectangle, 304 SS, 2B Mill Finish

    • Brand: 2TwentyTwo Steel Designs, LLC
    • ASIN: B079LF1N7K

  • .500 inch 304 Stainless Steel 12" X 12" Plate, Mill Finish

    304 / 304L stainless steel is a common commercial alloy. High corrosion resistance. High strength. Easily formed, rolled, machined, or welded. Non magnetic. 304 is used in industrial, architectural, and food service applications. Note: Stainless steel plate products from the mill are raw and unpolished. They often contain pits, minor rust spots, pen markings, and scratches due to the handling process (none are acceptable reasons for return). Printed material test reports (MTR's) for each plate are included in the box. Caution; heavy, sharp edges from cutting process, handle with care.

    • Brand: IRCwaterjet
    • ASIN: B07PRV4XHF

  • 304 Stainless Steel Strip, Unpolished (Mill) Finish, Annealed, ASTM A240/AMS 5513, 3/4" Thick, 3" Width, 6" Length

    The 304 stainless steel strip has an unpolished (mill) surface, has been annealed, and meets American Society for Testing and Materials International ASTM A240 and SAE Aerospace Material Specifications AMS 5513 standards. The 304 stainless steel grade is a general-purpose material that combines corrosion resistance, weldability, and formability, making it the most commonly used grade of stainless steel. An austenitic stainless steel that is one of the 18-8 grades, 304 can be cold worked to increase its hardness and strength while maintaining most of its formability. The material is typically nonmagnetic but may become slightly magnetic when cold worked. It has been annealed to modify its properties after shaping.Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Duplex grades are heat treatable and rough...

    • Brand: Small Parts
    • ASIN: B00D7O94JE

  • COLE & MASON Derwent Pepper Grinder - Stainless Steel Mill Includes Gourmet Precision Mechanism and Premium Peppercorns

    The Cole & Mason 7.5 inch Derwent Gourmet Precision Salt and Pepper Mills bring a modern steel style to your table with a sleek acrylic hourglass display. The peppermill uses premium hardened carbon steel millworks to bring user-friendly spice control to your table with six distinct settings, from fine powders to coarsely sliced and ground gourmet chunks. The Derwent pepper grinder is easy to refill by just lifting the top straight up and the grinding mechanism is also guaranteed for life. Style, durability and dependability have been built into every Cole & Mason product since 1919 using the best materials and mechanisms; our products have been well-regarded by professional cooks and homemakers ever since. Count on Cole & Mason to give your table pepper grinder a touch of class! To clean wipe outside only with lightly damp cloth

    • Color: Stainless Steel
    • Brand: Cole & Mason
    • ASIN: B003OICYZO
    • UPC: 054067594019

  • 304 Stainless Steel Strip, Unpolished (Mill) Finish, Annealed, ASTM A240/AMS 5513, 1/2" Thick, 2" Width, 6" Length

    The 304 stainless steel strip has an unpolished (mill) surface, has been annealed, and meets American Society for Testing and Materials International ASTM A240 and SAE Aerospace Material Specifications AMS 5513 standards. The 304 stainless steel grade is a general-purpose material that combines corrosion resistance, weldability, and formability, making it the most commonly used grade of stainless steel. An austenitic stainless steel that is one of the 18-8 grades, 304 can be cold worked to increase its hardness and strength while maintaining most of its formability. The material is typically nonmagnetic but may become slightly magnetic when cold worked. It has been annealed to modify its properties after shaping.Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Duplex grades are heat treatable and rough...

    • Brand: Small Parts
    • ASIN: B00D7O8JBI

  • EAGLE 1: 26 Gauge General Use or Roofing Flashing Rolls - DIY or Contractors (Multiple Sizes in Listing) (Stainless Steel, 18"x120")

    Our Stainless Steel rolls are great for many kinds of projects. Roofing, DIY projects or contractors and more!The material can be cut into your desired shape or size with normal hand snips.  Features:- High quality- 10 free matching fasteners and free 1/8" drill bit- Our stainless steel has appliance grade finish- Great for roofing- All material types are 26 Gauge or thicker- Brushed mill finished aluminum - Copper, stainless, and Galvanized can be soldered- Bent/folded without breaking or cracking- Multiple sizes- General uses for many types of ideas and projects- Stainless steel and painted steel rolls come with a protective film to help prevent scratches We know you will like our #3 Flashing Rolls! Buy with confidence!

    • Brand: Eagle 1
    • ASIN: B07DM5T719
    • UPC: 680499986209