• Manifold Installation Kit; Performer; EPS; SBC; 1957-1986; Natural Finish

    Performer EPS Intake Manifold Installation KitSB-Chevy 1957-86Idle-5500 RPM RangeNon-EGR applications4-bbl square-bore carb flange Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the Edelbrock Performer manifold 350-2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most. Look for the Performer EPS to "up the standards" in dual-plane intake manifold design. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains.Installation NotesPort Exit Dimensions: 1.15" x 1.87" Carb Pad Height: 4.27" Click here to determine carburetor pad height.Manifold Height: (A) 3.74" (B) 4.80"MANIFOLD INSTALLATION KITS INCLUDEKitPart #IntakeManifoldIntakeGasketIntakeBolt KitCarbStud KitCarbBase...

    • Brand: Edelbrock
    • ASIN: B0091V29H6
    • UPC: 008534720401

  • Edelbrock 2161 INTAKE MANIFOLD

    The Edelbrock Performer Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This combination boosts torque over a wide RPM range, from off-idle all the way up to 5, 500 RPM. The Performers are ideal for passenger cars, boats, tow vehicles and RV's. These manifolds also deliver improved throttle response over stock intakes and are available with non-EGR styles. They accept late-model choke, water neck, alternator, air conditioning brackets and have provisions for oil filler tube.

    • Brand: Edelbrock
    • ASIN: B000CN6WNY
    • UPC: 085347021611

  • Edelbrock 71013 Performer RPM Intake Manifold; Black; Non-EGR; 1500-6500rpm; For 4 bbl Carbs;

    Edelbrock Performer RPM Manifold Black

    • Brand: Edelbrock
    • ASIN: B01D1003TS

  • Edelbrock 2131 INTAKE MANIFOLD

    The Edelbrock Performer Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This combination boosts torque over a wide RPM range, from off-idle all the way up to 5, 500 RPM. The Performers are ideal for passenger cars, trucks, tow vehicles and RV's. These manifolds also deliver improved throttle response over stock intakes and are available with non-EGR styles. They accept late-model choke, water neck, alternator, air conditioning brackets and have provisions for oil filler tube.

    • Brand: Edelbrock
    • ASIN: B000CN6WK2
    • UPC: 085347021314

  • Edelbrock 2105 INTAKE MANIFOLD

    The Edelbrock Performer Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This combination boosts torque over a wide RPM range, from off-idle all the way up to 5, 500 RPM. The Performers are ideal for passenger cars, trucks, tow vehicles and RV's. These manifolds also deliver improved throttle response over stock intakes and are available with non-EGR styles. They accept late-model choke, water neck, alternator, air conditioning brackets and have provisions for oil filler tube.

    • Brand: Edelbrock
    • ASIN: B000CN6WFM
    • UPC: 085347021055

  • Edelbrock 2101 INTAKE MANIFOLD

    The Edelbrock Performer EGR (Electronic Gas Recirculation) Intake Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This patented design greatly improves torque over a wide RPM range for excellent throttle response, especially off-idle through the mid-range. The intake manifold directs the air or air-fuel mixture from the throttle body to the intake ports in the cylinder head. The flow typically proceeds from the throttle body into a chamber called the plenum, which in turn feeds individual tubes, called runners, leading to each intake port. It accepts late model water neck, air-conditioning, alternator and H. E. I. (Heat Energy Ignition).

    • Brand: Edelbrock
    • ASIN: B000182BA8
    • UPC: 085347021017

  • Edelbrock 2116 INTAKE MANIFOLD

    The Edelbrock Vortex Performer Intake Manifold is designed for square bore flange (non-EGR) and is intended to replace the OEM unit. This dual-plane Performer Vortex intake manifold is based on Edelbrock' s very popular Performer Series. It is used for street rods and accepts both square-bore and spread-bore carburetors and produces power from idle to 5, 500 RPM. It has provisions for external water bypass and may be used on either Vortex blocks or 1995 and earlier blocks but has no provision for exhaust-heated chokes. It accepts late model water neck, alternator, HEI and air conditioning and will not fit under the stock Corvette hood.

    • Brand: Edelbrock
    • ASIN: B00062Z2OQ
    • UPC: 085347021161

  • Edelbrock 2171 INTAKE MANIFOLD

    The Edelbrock Performer Intake Manifold is manufactured from aluminum and given a natural finish. They feature a patented runner design and have a non-EGR (Exhaust Gas Recirculation) style. This boosts the torque and horsepower over a wide RPM range, from off-idle to 5, 500 RPM. This Performer 400 intake is for 4-barrel carburetors and it has a square bore flange. They accept late-model choke, water neck, alternator, and air conditioning brackets and have provisions for oil filler tube.

    • Brand: Edelbrock
    • ASIN: B000CN8XHM
    • UPC: 085347021710

  • Edelbrock 21763 Performer 318/360 Intake Manifold; Black; Non-EGR; Idle-5500rpm; For 4 bbl Carbs;

    Edelbrock Performer 318 w/ O Egr Black

    • Brand: Edelbrock
    • ASIN: B01D100DZC

  • Edelbrock 2176 INTAKE MANIFOLD

    The Edelbrock Performer Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This combination boosts torque over a wide RPM range, from off-idle all the way up to 5, 500 RPM. The Performers are ideal for passenger cars, boats, tow vehicles and RV's. These manifolds also deliver improved throttle response over stock intakes and are available with non-EGR styles. They accept late-model choke, water neck, alternator, air conditioning brackets and have provisions for oil filler tube.

    • Brand: Edelbrock
    • ASIN: B000CN6WRK
    • UPC: 085347021765

  • Edelbrock 2151 INTAKE MANIFOLD

    The Edelbrock Performer Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This combination boosts torque over a wide RPM range, from off-idle all the way up to 5, 500 RPM. The Performers are ideal for passenger cars, boats, tow vehicles and RV's. These manifolds also deliver improved throttle response over stock intakes and are available with non-EGR styles. They accept late-model choke, water neck, alternator, air conditioning brackets and have provisions for oil filler tube. They do not have provisions for Original Equipment Manufacturer (OEM) choke operation.

    • Brand: Edelbrock
    • ASIN: B000CN6WLQ
    • UPC: 085347021512

  • Edelbrock 1404 Performer Series 500 cfm, Square-Flange, Manual Choke Carburetor (non-EGR)

    The Edelbrock Performer Series Manual Choke New Carburetor features a two-piece, all-aluminum construction for cooler operating temperatures and less warping. It is designed and calibrated for good street performance and fuel economy in the Edelbrock Performer manifolds. There are no gaskets below the fuel bowl level for fewer leaks and no plastic parts or power valves to blow out. The Performer manual choke carburetor includes both timed and full vacuum ports for ignition advance. The carburetors use easily changed metering rods for precise tuning.

    • Brand: Edelbrock
    • ASIN: B000CN8VZQ
    • UPC: 085347014040

  • Edelbrock 2111 INTAKE MANIFOLD

    The Edelbrock Performer Intake Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This patented design greatly improves torque over a wide RPM range for excellent throttle response, especially off-idle through the mid-range. The intake manifold directs the air or air-fuel mixture from the throttle body to the intake ports in the cylinder head. The flow typically proceeds from the throttle body into a chamber called the plenum, which in turn feeds individual tubes, called runners, leading to each intake port. The Performers are ideal for passenger cars, trucks and RVs. This dual bolt pattern water neck fits both automotive and marine applications.

    • Brand: Edelbrock
    • ASIN: B00062YANA
    • UPC: 085347021116

  • Edelbrock 7280 GASKET

    Edelbrock Intake Manifold Gaskets provide high heat resistance, excellent load retention and sealing performance on exhaust manifolds and headers. They are constructed from EnCore HTX-900 and a high-density non-asbestos fiber core composite material consisting of two graphite coated, heat resistant fiber blended sheets.

    • Brand: Edelbrock
    • ASIN: B000CSQUBS
    • UPC: 085347072804

  • Edelbrock 3711 INTAKE MANIFOLD

    The Edelbrock Performer Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This combination boosts torque over a wide RPM range, from off-idle all the way up to 5, 500 RPM. The Performers are ideal for passenger cars, boats, tow vehicles and RV's. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR styles. They accept late-model choke, water neck, alternator, air conditioning brackets and have provisions for oil filler tube.

    • Brand: Edelbrock
    • ASIN: B000CN6XQ0
    • UPC: 085347037117

  • Edelbrock 2711 INTAKE MANIFOLD

    Performer Olds 350 Intake Manifold is designed for street 307-330-350-403 c. i. d. Oldsmobile V8s, 1966-85. For non-EGR, the new number 2711 manifold comes with a universal pad to fit most carburetors with electric chokes.

    • Brand: Edelbrock
    • ASIN: B0021HYDN0
    • UPC: 085347027118

  • Edelbrock 2146 INTAKE MANIFOLD

    The Delbruck Performer Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This combination boosts torque over a wide RPM range, from off-idle all the way up to 5, 500 RPM. The Performers are ideal for passenger cars, trucks, tow vehicles and RV's. These manifolds also deliver improved throttle response over stock intakes and are available with non-EGR styles. They accept late-model choke, water neck, alternator, air conditioning brackets and have provisions for oil filler tube. They will fit cold air induction hoods.

    • Brand: Edelbrock
    • ASIN: B000CN6WKW
    • UPC: 085347021468

  • Edelbrock 21213 Intake Manifold

    Designed for street 260-289-302 c. i. d. Ford V8s without EGR. number 2121 is a stock replacement/street legal part for 289 and 302 V8s with OEM 4V carb. ; 1966-72 (1973 non-CA); except stock equipped EGR.

    • Brand: Edelbrock
    • ASIN: B004OSOWBC
    • UPC: 085347212132

  • Edelbrock 2156 INTAKE MANIFOLD

    The Performer Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This combination boosts torque over a wide RPM range, from off-idle all the way up to 5, 500 RPM. The Performers are ideal for passenger cars, boats, tow vehicles and RV's. These manifolds also deliver improved throttle response over stock intakes and are available with non-EGR styles. They accept late-model choke, water neck, alternator, air conditioning brackets and have provisions for oil filler tube.

    • Brand: Edelbrock
    • ASIN: B000CN6WN4
    • UPC: 085347021567

  • Edelbrock 3776 INTAKE MANIFOLD

    The Edelbrock Performer Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This combination boosts torque over a wide RPM range, from off-idle all the way up to 5, 500 RPM. The Performers are ideal for passenger cars, boats, tow vehicles and RV's. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR styles. They accept late-model choke, water neck, alternator, air conditioning brackets and have provisions for oil filler tube.

    • Brand: Edelbrock
    • ASIN: B000CN6XVU
    • UPC: 085347037766

  • Edelbrock 7166 Performer Rpm 460 Mnfld

    Performer RPM 460 Intake Manifold Cast Finish Non-EGR 1500-6500rpm Ford 429/460 cid For 4 bbl Carbs w/Standard Or Cobra-Jet Cyl. Heads Street/Hi Perf. Use Only

    • Brand: Edelbrock
    • ASIN: B000HLPN3Q
    • UPC: 008534071664

  • Edelbrock 1901 AVS CARB

    THE ULTIMATE PERFORMANCE CARBURETOR Designed and calibrated for small cubic-inch engines and dual-quad applications such as our RPM Dual-Quad Air-Gap, Edelbrock C-26, F-28 and Street Tunnel Ram. For single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1901/#1902 are calibrated for single-quad applications and factory equipped with: Metering Jets - Primary . 095, Secondary . 095, Primary Rod . 070 x . 052, orange spring (5' Hg). #1903 is calibrated for dual-quad applications and factory equipped with: Metering Jets - Primary . 095, Secondary . 077; Metering Rods - . 070 x . 052; #1904 includes Primary . 095, Secondary . 077; Metering Rods - . 070 x . 052; Step-Up Spring - orange (5' Hg).  Use carb Studs #8008 or #8024 if needed.  Match with an Edelbrock intake manifold for the ultimate induction upgrade. ** INSTALLATION NOTE: Manual choke AVS2 Carbs cannot be converted to electric choke. Carbs #1903, #1904 and #19034, #19044 are calibrated for dual-quad applications only and need to be purchased together, one manual and one electric. For single carb small-displacement engines and Street Tunnel Ram applications use carbs #1901, #1902, #19014 and #...

    • Brand: Edelbrock
    • ASIN: B00062YADU
    • UPC: 085347019014