• 3" Innoflue SW Horizontal Condensate Drain Tee - Pack of 10

    Designed to drain condensate from 3" Innoflue SW (Single Wall) vent system. Installs horizontally in a pipe section closest to the appliance. Drain size is 1.26" OD. Use with IANS03 connector ring (required) and IACE50 Centrocerin (optional).Features: Innoflue SW (Single Wall) is the only polymer vent system on the market listed to UL 1738; Accepted and approved by over 50 North Amercian manufacturers of boilers, water heaters and furnaces; Suitable for natural gas, propane and fuel-oil condensing and non-condensing (flue temp. below 248°F) appliances; All parts (pipe, fittings, etc. - both black and grey) are UV resistant and suitable for indoor or outdoor installation; Requires no primer/glue and does not leach chloride like PVC & CPVC; Costs less and is faster and easier to install than stainless steel venting, no special tools needed, zero clearance to combustibles; Industry-leading 2mm wall thickness; Built-in gasket allows for adhesive-free installation which can be adjusted at any time; May be installed through a wall, chimney, chase or between joists; Lightweight, requires minimal support; Made in the USA from environmentally-friendly PolyPropylene (PP).

    • Brand: Centrotherm
    • ASIN: B07BZHJNML

  • GOWE 1200c Horizontal Tube Furnace / Scientific lab equipment

    GOWE 1200c Horizontal Tube Furnace / Scientific lab equipment

    • Brand: Gowe
    • ASIN: B00ROT2MCE

  • 2" Innoflue SW Horizontal Condensate Drain Tee - Pack of 1

    Designed to drain condensate from 2" Innoflue SW (Single Wall) vent system. Installs horizontally in a pipe section closest to the appliance. Drain size is 1.26" OD. Use with IANS02 connector ring (required) and IACE50 Centrocerin (optional).Features: Innoflue SW (Single Wall) is the only polymer vent system on the market listed to UL 1738; Accepted and approved by over 50 North Amercian manufacturers of boilers, water heaters and furnaces; Suitable for natural gas, propane and fuel-oil condensing and non-condensing (flue temp. below 248°F) appliances; All parts (pipe, fittings, etc. - both black and grey) are UV resistant and suitable for indoor or outdoor installation; Requires no primer/glue and does not leach chloride like PVC & CPVC; Costs less and is faster and easier to install than stainless steel venting, no special tools needed, zero clearance to combustibles; Industry-leading 2mm wall thickness; Built-in gasket allows for adhesive-free installation which can be adjusted at any time; May be installed through a wall, chimney, chase or between joists; Lightweight, requires minimal support; Made in the USA from environmentally-friendly PolyPropylene (PP).

    • Brand: Centrotherm
    • ASIN: B07BZGR9XN

  • 4" Innoflue SW Horizontal Condensate Drain Tee - Pack of 1

    Designed to drain condensate from 4" Innoflue SW (Single Wall) vent system. Installs horizontally in a pipe section closest to the appliance. Drain size is 1.26" OD. Use with IANS04 connector ring (required) and IACE50 Centrocerin (optional).Features: Innoflue SW (Single Wall) is the only polymer vent system on the market listed to UL 1738; Accepted and approved by over 50 North Amercian manufacturers of boilers, water heaters and furnaces; Suitable for natural gas, propane and fuel-oil condensing and non-condensing (flue temp. below 248°F) appliances; All parts (pipe, fittings, etc. - both black and grey) are UV resistant and suitable for indoor or outdoor installation; Requires no primer/glue and does not leach chloride like PVC & CPVC; Costs less and is faster and easier to install than stainless steel venting, no special tools needed, zero clearance to combustibles; Industry-leading 2mm wall thickness; Built-in gasket allows for adhesive-free installation which can be adjusted at any time; May be installed through a wall, chimney, chase or between joists; Lightweight, requires minimal support; Made in the USA from environmentally-friendly PolyPropylene (PP).

    • Brand: Centrotherm
    • ASIN: B07BZGM5KV