• HDPE (High Density Polyethylene) Sheet, Opaque Off-White, Standard Tolerance, ASTM D4976-245, 0.500" Thickness, 12" Width, 24" Length

    The opaque off-white HDPE sheet has a standard tolerance and meets American Society for Testing and Materials ASTM D4976-245 specifications. HDPE (high density polyethylene) is a rigid, tough plastic that offers good chemical resistance and low moisture absorption. HDPE is stronger and more rigid than LDPE.Plastic refers to a group of synthetic or semi-synthetic materials that have been engineered to achieve specific properties. The most notable characteristics of plastics are its low weight, machinability, corrosion resistance, and typically good thermal and electrical insulating properties. Certain plastic grades also offer optical transparency similar to glass, low-friction or self-lubricating surfaces, and exceptional impact resistance. Depending on their properties, certain plastic grades can be used as alternatives to metal, glass, and ceramic. Unlike metal, plastic may experience creep, which is deformation caused by longtime exposure to a constant load.Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by...

    • Color: Off-White
    • Brand: Small Parts
    • ASIN: B000ILHWAM
    • UPC: 792273162195

  • Restaurant Thick White Plastic Cutting Board, NSF, FDA Approved - 18 x 12 x 1 Inch

    Restaurant and Food Service Green Cutting Board, Extra Large Designed for professional food service, these cutting boards are engineered with specialty poly that provides superior performance over other standard plastics. Featuring a true one inch thick surface composed of high density polypropylene (HDPP), these boards surpass all FDA standards and are NSF certified as well. Green color coded for HACCP standards for preparation of salads, vegetables and fruit. The HDPP vs HDPE / PE difference: Warp resistant and withstands dishwashers up to 215 F vs 185 F Better wear - Resists acids (stains), solvents (bleach, cleaners) and other oils Longer durability - Higher density material with stronger structural composition Less sliding - Heavier weight provides better surface grip Superior cold resistance - Can safely use in freezers or cold storage without degrading board life Side by side, our cutting boards are far preferred by restaurants for overall cost and investment due to the longer life span. Plus, no fighting with wobbly cutting boards that are a both a safety risk for knife cuts and also sanitation. Each board is lightly textured to add tactile sensation and grip as well. Weighs 7 pounds

    • Color: White
    • Brand: CuttingBoard
    • ASIN: B074HQTJX5
    • UPC: 688168588501

  • New Star Foodservice 28850 Cutting Board, 15x20x1/2-Inch, White

    New Star Foodservice believes in providing quality. That is the reason we focus on developing essential kitchen products that stand up to the high volume and heavy use environments of restaurants, while also providing the functionality and durability that cooks of all backgrounds utilize to be successful. Our quality also goes beyond our products thanks to our wonderful and resourceful team whose main purpose is to provide any assistance our customers might need, from answering questions about our items to quickly shipping replacements for orders damaged in transit. Whether you are a professional chef working in a huge commercial kitchen or a culinary artist cooking at home, New Star is here to serve you

    • Color: White
    • Brand: New Star Foodservice
    • ASIN: B01KOS0SHM
    • UPC: 639713028850

  • Marine Board HDPE (High Density Polyethylene) Plastic Sheet 1/4" x 12" x 24” Black Color Textured

    Marine Board HDPE (High Density Polyethylene) Plastic Sheet 1/4" x 12" x 24" Black Color Textured. High density polyethylene (HDPE) is used in a variety of applications and industries where excellent impact resistance, high tensile strength, low moisture absorption and chemical- and corrosion-resistance properties are required. High density polyethylene is harder than low density polyethylene and has higher tensile strength, and better compressive strength. HDPE has good insulation properties and is easy to weld. The operating temperature is from -58 °F to +194 °F. HDPE is a cost effective material for both indoor and outdoor applications. Material : High Density Polyethylene Shape: Sheet Thickness: 0.220 inch Width: 12 inches Length: 24 inches Finish: Textured

    • Color: Black
    • Brand: Polymersan
    • ASIN: B06X9GBXJS
    • UPC: 714038306415

  • Marine Board HDPE (High Density Polyethylene) Plastic Sheet 1/2" x 24" x 48” Black Color Textured

    Marine Board HDPE (High Density Polyethylene) Plastic Sheet 1/2" x 24" x 48" Black Color Textured. High density polyethylene (HDPE) is used in a variety of applications and industries where excellent impact resistance, high tensile strength, low moisture absorption and chemical- and corrosion-resistance properties are required. High density polyethylene is harder than low density polyethylene and has higher tensile strength, and better compressive strength. HDPE has good insulation properties and is easy to weld. The operating temperature is from -58 °F to +194 °F. HDPE is a cost effective material for both indoor and outdoor applications. Material : High Density Polyethylene Shape: Sheet Thickness: 0.500 inch Width: 24 inches Length: 48 inches Finish: Textured

    • Color: Black
    • Brand: Polymersan
    • ASIN: B073BV5LN9
    • UPC: 714038306385

  • Commercial Grade Cutting Board Mats - 4 Color Set, 15 x 12 Inch NSF

    Commercial Cutting Board Mat - 15 x 12 inch, 4 Color Set Designed for professional use, this set of color coded mats are useful for temporary or mobile kitchen preparation. From weddings to food trucks, these plastic cutting board mats are easy to transport and store while providing frustration free service. Our mats are produced from high density polyethylene, which is the same poly used in high-end commercial plastic cutting boards. There is no better plastic on the market for this type of application.

    • Color: Multi-Color (4 Pack)
    • Brand: Thirteen Chefs
    • ASIN: B07B8C6RTW

  • Marine Board HDPE (High Density Polyethylene) Plastic Sheet 1/4" x 24" x 48” Black Color Textured

    Marine Board HDPE (High Density Polyethylene) Plastic Sheet 1/4" x 24" x 48" Black Color Textured. High density polyethylene (HDPE) is used in a variety of applications and industries where excellent impact resistance, high tensile strength, low moisture absorption and chemical- and corrosion-resistance properties are required. High density polyethylene is harder than low density polyethylene and has higher tensile strength, and better compressive strength. HDPE has good insulation properties and is easy to weld. The operating temperature is from -58 °F to +194 °F. HDPE is a cost effective material for both indoor and outdoor applications. Material : High Density Polyethylene Shape: Sheet Thickness: 0.220 inch Width: 24 inches Length: 48 inches Finish: Textured

    • Color: Black
    • Brand: Polymersan
    • ASIN: B06XB3N6KJ
    • UPC: 714038306408

  • Marine Board HDPE (High Density Polyethylene) Plastic Sheet 1/2" x 12" x 24” White Color Textured

    Marine Board HDPE (High Density Polyethylene) Plastic Sheet 1/2" x 12" x 24" White Color Textured. High density polyethylene (HDPE) is used in a variety of applications and industries where excellent impact resistance, high tensile strength, low moisture absorption and chemical- and corrosion-resistance properties are required. High density polyethylene is harder than low density polyethylene and has higher tensile strength, and better compressive strength. HDPE has good insulation properties and is easy to weld. The operating temperature is from -58 °F to +194 °F. HDPE is a cost effective material for both indoor and outdoor applications. Material : High Density Polyethylene Shape: Sheet Thickness: 0.500 inch Width: 12 inches Length: 24 inches Finish: Textured

    • Color: White
    • Brand: Polymersan
    • ASIN: B07Q1YS9N3

  • Marine Board HDPE (High Density Polyethylene) Plastic Sheet 1/4" x 11" x 48” Black Color Textured

    Marine Board HDPE (High Density Polyethylene) Plastic Sheet 1/4" x 11" x 48" Black Color Textured. High density polyethylene (HDPE) is used in a variety of applications and industries where excellent impact resistance, high tensile strength, low moisture absorption and chemical- and corrosion-resistance properties are required. High density polyethylene is harder than low density polyethylene and has higher tensile strength, and better compressive strength. HDPE has good insulation properties and is easy to weld. The operating temperature is from -58 °F to +194 °F. HDPE is a cost effective material for both indoor and outdoor applications. Material : High Density Polyethylene Shape: Sheet Thickness: 0.220 inch Width: 11 inches Length: 48 inches Finish: Textured

    • Color: Black
    • Brand: Polymersan
    • ASIN: B071NTDW4Y
    • UPC: 714038306620

  • Commercial Plastic Carving Board with Groove, NSF Certified, HDPE Poly (30 x 18 x 0.5 Inch, White)

    30 x 18 x 0.5 with Juice Groove Commercial Plastic Carving and Cutting Board Our professional grade poly carving board is engineered for food service professionals for frequent and repetitive use. Made using a multi-process injection molded manufacturing process, our HDPE (high density polyethylene) boards have good wear and heat tolerance engineered for high use environments. Designed by chefs, the surface is lightly textured to provide a slight grip to help prevent slipping and to assist with prep. An outer groove well (juice groove) also keeps liquids from running off the cutting board and onto the work tables or countertops. Each cutting board is NSF certified and bears the NSF stamp and logo. HDPE is also FDA approved for food contact. *Disclaimer packaging materials stating dishwasher safe up to 250 degrees is incorrect. Maximum temperature should be no greater than 185 degrees F.

    • Color: White
    • Brand: Thirteen Chefs
    • ASIN: B07C81T4R8