• HeliMax Axe 100 FP Flybarless SLT Tx-R RC Helicopter

    This is the Heli-Max Axe 100 FP Flybarless SLT Heli Tx-R. This is the Tx-R (Transmitter Ready) version that includes an ESC servos and receiver. With the AnyLink SLT 2.4GHz Radio Adapter (TACJ2000) and the correct AnyLink cable any compatible 4-6 channel heli aircraft transmitter can be used to fly this helicopter. Features: Flybarless fixed pitch rotor head designed for forgiving flights Rotary drive digital servos with full case design for impact protection SLT Receiver TAGs (Triple Axis Gyro Stabilization) system gives stability to the yaw roll and pitch axes 3.7V 1S 150mAh LiPo Battery USB compatible Battery Charger Warranty (through the manufacturer): Heli-Max guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification. Includes: One Heli-Max Axe 100 FP Helicopter with Servos SLT Receiver Gyro LiPo Battery Charger four AA Cells Instruction Manual Requires: Tactic AnyLink SLT 2.4GHz Radio Adapter (TACJ2000) to adapt heli transmitter (the Futaba Square TACM0001 and JR Spektrum TACM0002 are included with the AnyLink adapter) Note: Tactic 2.4GHz 4 or 6 channel transmitters do not require the AnyLink adapter

    • Brand: HeliMax
    • ASIN: B00DLM4EDS
    • UPC: 667298008165

  • Heli Max Servo Arms w/Ball Links Axe 100 CP/SS/SSL HMXE2118

    Heli-Max Servo Arms w/Ball Links Axe 100 CP

    • Brand: HeliMax
    • ASIN: B00CF8H6P2
    • UPC: 667298021188

  • Heli-Max Servo for Axe CP Helicopter

    This is the Servo for the Heli-Max Axe CP Helicopter. FEATURES: Controls Swash plate functions INCLUDES: Servo (part #11) for the Heli-Max Axe CP Heli.

    • Brand: HeliMax
    • ASIN: B000X4Q3LI
    • UPC: 667298420042

  • Heli-Max Servo Arms - Axe CP w/Screws

    Heli-Max Axe CP servo arms are a straight single arm design with multiple linkage mounting holes. This is a set of three servo arms and three mounting screws.

    • Brand: HeliMax
    • ASIN: B000X4KYR2
    • UPC: 667298088181

  • Align D6CF Metal Servo Horn

    This is an Align D6CF Metal Servo Horn Set, and is intended for use with the Align 550, 600 and 700 helicopters. These servo horns are compatible with Futaba servos, as well as any servo that uses a 25T spline output shaft.

    • Brand: Align
    • ASIN: B0045ZX74C
    • UPC: 885865917010

  • Helimax Ball Link Pushrod Set Servo/Swash Links Novus CX

    Heli-Max ball links are constructed of nylon and aluminum. This package includes two 15mm nylon ball links and two 27mm aluminum ball links.

    • Brand: HeliMax
    • ASIN: B002732NGM
    • UPC: 667298085388

  • Heli Max Servo Linkage Set Axe CX Nano HMXE8578

    FEATURES: Metal connecting linkages with black plastic turnbuckle ends INCLUDES: Two servo linkages REQUIRES: Installation SPECS: Length: 1.48" (37.62) Diameter: .030" (.9mm)

    • Brand: HeliMax
    • ASIN: B004QJVF28
    • UPC: 667298085784

  • Heli-Max Servo Mount - Novus CP

    HeliMax servo mount is constructed of black nylon.

    • Brand: HeliMax
    • ASIN: B002ABN2EI
    • UPC: 667298079530

  • Heli-Max Servo Frame Mount - Novus FP

    Heli-Max servo frame mount is constructed of black nylon.

    • Brand: HeliMax
    • ASIN: B0029KELEK
    • UPC: 667298084336

  • Heli-Max Servo Mount Axe EZ

    This is the replacement Servo Mount for the Heli-Max / AXE EZ EP Heli RTF - HMXE05**. / / FEATURES: Nylon construction, Black in color / Replaces a worn or damaged Servo Mount / / INCLUDES: One Servo Mount - key number 11 / / REQUIRES: Installation / / SPECS: Length: .95"" (24mm) / Width: 1.65"" (42mm) / Height: 1.10"" (28mm) / kpm01/09/2007 / ir/jxs

    • ASIN: B000X4MYTI
    • UPC: 667298079127

  • Castle Creations Talon 90 Amp Electronic Speed Controller with Heavy Duty BEC

    Talon 90 sports a BEC designed for today's servos, pumping out up to 20 amps peak power and 9 amps of continuous power to keep even the hungriest servos happy. Talon 90 is ideal for helicopters drawing 2,000 watts on 6S. It's a great fit for extreme 500 and 550 class helis and sport (6S) 600 setups. Of course, Talon 90 offers Castle's industry-leading helicopter functions, such as the unbelievable direct entry governor mode. Simply type in the desired RPM using a Castle Link USB adapter (sold separately) and the free Castle Link GUI running on a Windows PC! Talon 90 is perfect for aerobat's up to 10 pounds and scale ships up to 20 pounds. The innovative case ensures cooling in even the toughest mounting locations.

    • Brand: Castle Creations
    • ASIN: B00A0KQDCO
    • UPC: 819326010316

  • 2-Pieces Hobbywing 5V-6V-3A Switch-mode-UBEC for Rc Helicopter, Airplane, Quadcopter, Rc Cars Max 5A Lowest RF - HOBBYMATE

    2-Pieces Hobbywing 5.2V-5.25V/5.85V-6V 3A Switch-mode UBEC for Rc Helicopter, Airplane, Quadcopter Drone, Max 5A Lowest RF - Targethobby switch-mode DC-DC regulator supplied with a 2-6 cells lithium battery pack Supplying a consistent safe voltage for your receiver, gyro and servos Input: 5.5V-26V Size: 43mm*17mm*7mm (L*W*H)

    • Brand: Hobbywing
    • ASIN: B01GHMW0C0
    • UPC: 888917004164

  • Castle Creations PHX Edge Lite 75 Amp Electronic Speed Controller with 5 Amp BEC

    Put your power system on a diet with the Phoenix Edge Lite series of ESCs. With the same amazing features and functionality of the Edge series, the Edge Lite offers a slight weight reduction for applications that are tight for space or weight. Simply put, the same brawn with less body - Phoenix Edge Lite. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an "unexpected landing", act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility. The Phoenix Edge LITE series is intended for use in 450 size helicopters and fixed wing aircraft up to 1.20 size and larger. As always, the Edge series of controllers offer industry-leading software functions, data logging and USB programming capability via Castle Link USB adapter (free with included coupon).

    • Brand: Castle Creations
    • ASIN: B00CSXSELY
    • UPC: 819326010156

  • Castle Creations PHX Edge 80 HV - 80 Amp Electronic Speed Controller

    With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an "unexpected landing", act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility. The Phoenix Edge series is intended for use in helicopters ranging from 450 to 800 size and fixed wing aircraft up to 1.20 size and larger. As always, the Edge series of controllers offer industry-leading software functions, data logging and USB programming capability via Castle Link USB adapter (free with included coupon).

    • Brand: Castle Creations
    • ASIN: B00CSXSC3E
    • UPC: 819326010071

  • 40A RC Brushless Motor Electric Speed Controller ESC 3A UBEC with XT60 & 3.5mm bullet plugs

    The RC Electric Parts 40A Electric Speed Controller (ESC) is a great little powerful ESC that runs very well and doesn't run hot like other ESCs! The ESC comes pre-soldered with 3.5mm Bullet Plugs and an XT60 Plug, eliminating the need for you to solder your own plugs on! The ESC can be programmed via the transmitter as explained in the instructions or using a programming card that can be purchased separately. Make sure to use an RC Electric Parts Programming card to ensure that it'll properly program the ESC. Benefits: Programmable Super smooth and accurate linear throttle adjustment Supports high RPM motors Utilizes smaller MOSFETs to minimize weight Minimal heat dissipation Specs: Continuous: 40A Bursts: 60A for 10 seconds UBEC: 5V/3A Lipo Battery: 2 - 4s (cells) NiCd/NiMH: 5 - 12 cells Size: 71mm x 35mm x 10.5mm Weight: 48g Motor Type: Brushless MotorMax RPM: 240,000 rpm for a 2 pole, 80,000 rpm for a 6 pole, or 40,000 rpm for a 12 pole brushless motorESC Manual: https://www.rcelectricparts.com/esc-user-guide.htmlProgramming Card Linkhttps://www.amazon.com/dp/B07GCVLJ12?ref=myi_title_dp

    • Brand: RC Electric Parts
    • ASIN: B0754H7XZZ
    • UPC: 796752625539

  • Castle Creations PHX Edge 75 Amp Electronic Speed Controller with 5 Amp BEC

    With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an "unexpected landing", act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility. The Phoenix Edge series is intended for use in helicopters ranging from 450 to 800 size and fixed wing aircraft up to 1.20 size and larger. As always, the Edge series of controllers offer industry-leading software functions, data logging and USB programming capability via Castle Link USB adapter (free with included coupon).

    • Brand: Castle Creations
    • ASIN: B00CQ86MHE
    • UPC: 819326010033

  • Heli Max Axe 100 CP/SS/SSL Canopy/Servo Mount

    Canopy/Servo Mount Axe 100 CP/SS/SSL

    • Brand: HeliMax
    • ASIN: B00CF8GIPQ
    • UPC: 667298021201

  • Castle Creations PHX Edge 120 HV - 120 Amp Electronic Speed Controller

    With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an "unexpected landing", act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility. The Phoenix Edge series is intended for use in helicopters ranging from 450 to 800 size and fixed wing aircraft up to 1.20 size and larger. As always, the Edge series of controllers offer industry-leading software functions, data logging and USB programming capability via Castle Link USB adapter (free with included coupon).

    • Brand: Castle Creations
    • ASIN: B00CQ88H68
    • UPC: 819326010064

  • Helimax Servo Pushrods w/Ball Links Axe CX Micro/Comanche CX

    FEATURES: Metal and Nylon Construction Black and Silver in Color INCLUDES: Two Servo Pushrods REQUIRES: Installation SPECS: Length: 30mm (1.1") Width: 1mm (.03")

    • Brand: HeliMax
    • ASIN: B001LG5IHC
    • UPC: 667298085340

  • Castle Creations PHX Edge 160 HV - 160 Amp Electronic Speed Controller

    With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an "unexpected landing", act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility. The Phoenix Edge series is intended for use in helicopters ranging from 450 to 800 size and fixed wing aircraft up to 1.20 size and larger. As always, the Edge series of controllers offer industry-leading software functions, data logging and USB programming capability via Castle Link USB adapter (free with included coupon).

    • Brand: Castle Creations
    • ASIN: B00CSXSDOW
    • UPC: 819326010057

  • Castle Creations Talon 25-25 Amp Electronic Speed Controller with Heavy Duty BEC

    This compact controller can keep it's cool even during the most extreme 3D maneuvers. Talon 25 is intended for use in most 400-size helicopter setups running up to 6S LiPo or your favorite 3D foamie that pulls up to 25 amps. Despite it's size, it boasts an impressive 8 amp peak/3 amp continuous BEC, keeping even the most draining servos at ease. Talon 25 also offers Castle's industry-leading helicopter functions, not to mention easy programming using the Castle Link USB adapter (coupon for free Castle Link included). Talon 25 tips the scales at a mere 18 grams.

    • Brand: Castle Creations
    • ASIN: B00DM6JU5K
    • UPC: 819326010545

  • Castle Creations Talon 15 Amp Electronic Speed Controller with Heavy Duty BEC

    We packed as much brute power and intelligence into this tiny layout as we possibly could and came up with a 15 amp* controller with ability to sustain an 8 amp BEC! Talon 15 measures just 1.1" long and is under 0.6" wide! At nearly the size of a quarter, this ESC supports an outlandish 8 amp** peak BEC with output voltage of 5.5 VDC. Applications range from foamies to micro and sub-micro helis running up to 4S and pulling 15 amps. As with any Castle ESC, the Talon 15 offers Castle's industry-leading functions, not to mention easy programming using the Castle Link USB adapter (coupon for free Castle Link included), or the Castle Field Link Portable Programmer (sold separately).

    • Brand: Castle Creations
    • ASIN: B00HVMQZBI
    • UPC: 819326010699

  • Helimax Servo Linkage Set Novus FP

    HELI-MAX Servo Linkage Set Novus FP HMXE8549

    • Brand: HeliMax
    • ASIN: B0029KCVKG
    • UPC: 667298085494

  • Helimax Servo Mounting Screws Axe CP (6)

    These are Servo Mounting Screws for the Heli-Max Axe CP. FEATURES: Self-tapping Machine head INCLUDES: (6) Screws REQUIRES: Installation SPECS: Length: 7.5mm Diameter: 2mm

    • Brand: HeliMax
    • ASIN: B000X4RWBS
    • UPC: 667298088143