• Cherry Wood Veneer Plain Sliced 10 mil(Paperback) 2'x8' Sheet

    Cherry Flat Cut Wood Veneer A Grade 2'x8' 10 mil (Paperback) (Overall Thickness .024”+/- .010) The 10 mil paper backed veneer provides stability and flexibility while helping to minimize splitting, grain-raise and glue seepage. Tenderized Paperback veneer will bend to wrap a 1" radius. Grain and Color appearance variation can be expected from sheet to sheet and lot to lot, it will vary from what is pictured because it is a natural wood product. Solvent-Based adhesive is recommended. Water based adhesives are not recommended. Adhesives should be allowed to cure for 48 hours prior to finishing. Ready for light stain and/or clear finish. Great for refacing, refurbishing, and repairing furniture, shelves, cabinets, ect. All veneer should be acclimated prior to application. Surface must be clean, dry and smooth to ensure a good bond. Machine Surface Sand of 150 grit. Veneer is sanded to a smooth uniform finish. Application instructions included with material.

    • Brand: Wood-All
    • ASIN: B009KN8INE
    • UPC: 819443010855

  • Unfinished PSA Cherry Veneer Pack | Wood Sheets Perfect for Laser Cutter, Wood Burning, and Paint Crafts

    GRADE BB/BB- This 0.5mm Hardwood Veneer Has 3-6 small color-matched patches on average and some light mineral streaks. Tight pin knots may be present. Inner cores are solid single piece veneers. Photos are a good representation of the typical product. SIZE - Each Piece Ranges from 4 in. up to 6 in. wide by 5 Inches Long. The Pack will be a little over 2 Square Feet of material. FLEXIBLE - This unfinished cherry wood will bend over curved surfaces like jars and water bottles. It is fragile until its stuck. The PSA adhesive is 3M 9505.works great with cricut and other cutting devices LASER CUTTER WOOD BURNER COMPATIBLE - The Cherry veneer is designed to be thick enough for wood burning and laser cutter engraving / etching while still being flexible. The perfect wood for all of your DIY wood craft needs.

    • Color: Unfinished Cherry Wood
    • Brand: Oswego Wood Co.
    • ASIN: B07NKTYBC7

  • Cherry Preglued 3/4" X 50' Wood Veneer Edgebanding Roll - Flexible Wood Tape, Easy Application Iron On with Hot Melt Adhesive. Smooth Sanded Finish. Made in USA.

    High Quality Wood veneer edgebanding cherry Pre-glued Size 3/4" X 50' (With high quality adhesive) and finely sanded to perfection. The wood edgebanding roll can be applied with an iron or it can be applied with an edgebander machine. We offer the highest quality wood edgebanding in the Market. We also offer many other wood species and sizes upon request ready for immediate delivery. NEXT DAY delivery is also available upon request.

    • Brand: Edge Supply
    • ASIN: B01B0Y4C0I
    • UPC: 736283520712

  • 3/4 Cherry Plywood 24" x 48" [CAPITOL CITY LUMBER]

    This is a domestic unfinished flat-cut Cherry veneer plywood. Front face is an A grade that is a smooth sanded and clear face. Back side is a 2 grade that will have more blemishes than the front A face, but is usually clean enough to be seen. This plywood is a stain grade. Sheets are sold individually, but a discount will apply when purchasing 2 or more sheets. Our plywoods are sold in larger sheets at the lumber yard and cut down to smaller sizes in our woodshop. Please allow 1/8"+/- variance in size to allow for saw blade cutting.

    • ASIN: B0049AAJ12
    • UPC: 610074106692

  • Cherry Preglued 3/4" X 10' Wood Veneer Edgebanding Roll - Flexible Wood Tape, Easy Application Iron On with Hot Melt Adhesive. Smooth Sanded Finish. Made in USA.

    High Quality Wood veneer edgebanding Birch Pre-glued iron on,With high quality adhesive and finely sanded to perfection. The wood edge banding roll can be applied with an iron, hot air blower or it can be applied with an edgebander machine. We offer the highest quality wood edge banding in the Market. We also offer many other wood species and sizes upon request ready for immediate delivery. An ordinary household iron is all you need to apply this premium hot-melt edge banding. Just position the edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated with a high-speed hot-melt glue that creates a permanent bond. They also are pre-sanded and readily accept stains and finishes.

    • Brand: Edge Supply
    • ASIN: B07RKKQWG9
    • UPC: 089415130342

  • Cherry 3/4" x 250' Roll Preglued, Wood Veneer Edge Banding, Flexible Wood Tape, Easy Application Iron On with Hot Melt Adhesive. Smooth Sanded Finish Veneer Edging. Made in USA.

    High Quality Wood veneer edgebanding cherry Pre-glued iron on, size 3/4" X 250' (With high quality adhesive) and finely sanded to perfection. The wood edge banding roll can be applied with an iron, hot air blower or it can be applied with an edgebander machine. We offer the highest quality wood edge banding in the Market. We also offer many other wood species and sizes upon request ready for immediate delivery. An ordinary household iron is all you need to apply this premium hot-melt edge banding. Just position the edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated with a high-speed hot-melt glue that creates a permanent bond. They also are pre-sanded and readily accept stains and finishes.

    • Brand: Edge Supply
    • ASIN: B011W1X8B8
    • UPC: 712048261922

  • Alvin AP442 Pavillon Art and Drawing Table Unfinished Wood Top 31 inches x 42 inches

    Perfect table for aspiring artists, crafters, or hobbyists. Despite its light and attractive appearance, this table is surprisingly strong, stable, and sturdy. Board angle adjusts from horizontal (0) to 60. Height adjusts 31 inches to 40 inches , firmly secured by twin adjustment knobs. Solid wood base construction with smooth, cherry-color finish. Supplied with 24 inches wood pencil ledge and brass hardware. Natural, unfinished wood top includes vinyl edges 39 pounds.

    • Color: Brown
    • Brand: Alvin
    • ASIN: B000GBTVMQ
    • UPC: 640794000000

  • Cherry Wood Veneer Edge Banding Preglued 2" X 25' Roll

    Real wood edge banding tape is for covering the edges of plywood and other non-wood edges and surfaces that need to be nicely finished. Common uses are for furniture and cabinetry, but edge tape will adhere to nearly any type of surface. All edge tape has a heat-sensitive glue backing and applies quickly with an iron. Our glue is CARB II formaldehyde free adhesive. Our wood is finely sanded to perfection and installs easily by applying heat for a few seconds by any household iron. ** Because our edge banding is made from real wood, from time to time we see some natural inconsistencies. IF YOU ARE NOT HAPPY with your roll because of natural variation that occurs in trees or poorly placed finger joints, PLEASE CONTACT US AND WE WILL SEND YOU A FREE ROLL. **

    • Brand: Beach Handiworks
    • ASIN: B076Z5NSTK
    • UPC: 666412023237

  • Maple Wood Veneer Edge Banding Preglued 3/4" X 250' Roll

    Real wood edge banding tape is for covering the edges of plywood and other non-wood edges and surfaces that need to be nicely finished. Common uses are for furniture and cabinetry, but edge tape will adhere to nearly any type of surface. All edge tape has a heat-sensitive glue backing and applies quickly with an iron. Our glue is CARB II formaldehyde free adhesive. Our wood is finely sanded to perfection and installs easily by applying heat for a few seconds by any household iron. ** Because our edge banding is made from real wood, from time to time we see some natural inconsistencies. IF YOU ARE NOT HAPPY with your roll because of natural variation that occurs in trees or poorly placed finger joints, PLEASE CONTACT US AND WE WILL SEND YOU A FREE ROLL. **

    • Brand: Beach Handiworks
    • ASIN: B075CHYLG6
    • UPC: 666412023121

  • Cherry Preglued 7/8" X 250' Wood Veneer Edgebanding Roll - Flexible Wood Tape, Easy Application Iron On with Hot Melt Adhesive. Smooth Sanded Finish. Made in USA

    High Quality Wood veneer edgebanding cherry Pre-glued iron on, size 7/8" X 250' (With high quality adhesive) and finely sanded to perfection. The wood edge banding roll can be applied with an iron, hot air blower or it can be applied with an edgebander machine. We offer the highest quality wood edge banding in the Market. We also offer many other wood species and sizes upon request ready for immediate delivery. An ordinary household iron is all you need to apply this premium hot-melt edge banding. Just position the edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated with a high-speed hot-melt glue that creates a permanent bond. They also are pre-sanded and readily accept stains and finishes.

    • Brand: Edge Supply
    • ASIN: B0128EYNQC
    • UPC: 712048262141

  • Skelang Cherry 3/4" X 50' Roll Wood Veneer Edge Banding Preglued Iron-On with Hot Melt Adhesive Edgebanding Flexible Wood Tape

    Edge banding is used to cover the exposed sides of materials such as plywood, particle board or MDF, increasing durability and giving the appearance of a solid or more valuable material. Our cherry wood edge banding pleglued are made of real cherry wood with high quality adhesive.The preglue backing was a nice touch and easy to work well by the iron or the edgebander machine. As you know that Cut a strip to length, heated up your wife's iron, aligned the strip to the sanded wood edge and applied the iron. The strip attached quickly and firmly. Specifications: Material: Cherry wood Width :3/4 inches Overall Length: 50 feet Feature: Pre-glued Package Includes: 1* Cherry Wood Veneer Edgebanding

    • Brand: Skelang
    • ASIN: B07H8M1B4G
    • UPC: 736140236992

  • Birch Wood Veneer Edge Banding Preglued 3/4" X 250' Roll

    Real wood edge banding tape is for covering the edges of plywood and other non-wood edges and surfaces that need to be nicely finished. Common uses are for furniture and cabinetry, but edge tape will adhere to nearly any type of surface. All edge tape has a heat-sensitive glue backing and applies quickly with an iron. Our glue is CARB II formaldehyde free adhesive. Our wood is finely sanded to perfection and installs easily by applying heat for a few seconds by any household iron. ** Because our edge banding is made from real wood, from time to time we see some natural inconsistencies. IF YOU ARE NOT HAPPY with your roll because of natural variation that occurs in trees or poorly placed finger joints, PLEASE CONTACT US AND WE WILL SEND YOU A FREE ROLL. **

    • Brand: Beach Handiworks
    • ASIN: B075CBHR6K
    • UPC: 666412023060

  • Walnut Wood Veneer Edge Banding Preglued 2" X 250' Roll

    Real wood edge banding tape is for covering the edges of plywood and other non-wood edges and surfaces that need to be nicely finished. Common uses are for furniture and cabinetry, but edge tape will adhere to nearly any type of surface. All edge tape has a heat-sensitive glue backing and applies quickly with an iron. Our glue is CARB II formaldehyde free adhesive. Our wood is finely sanded to perfection and installs easily by applying heat for a few seconds by any household iron. ** Because our edge banding is made from real wood, from time to time we see some natural inconsistencies. IF YOU ARE NOT HAPPY with your roll because of natural variation that occurs in trees or poorly placed finger joints, PLEASE CONTACT US AND WE WILL SEND YOU A FREE ROLL. **

    • Brand: Beach Handiworks
    • ASIN: B076Z5JG6Y
    • UPC: 666412023176

  • Red Oak Wood Veneer Edge Banding Preglued 13/16" X 250' Roll

    Real wood edge banding tape is for covering the edges of plywood and other non-wood edges and surfaces that need to be nicely finished. Common uses are for furniture and cabinetry, but edge tape will adhere to nearly any type of surface. All edge tape has a heat-sensitive glue backing and applies quickly with an iron. Our glue is CARB II formaldehyde free adhesive. Our wood is finely sanded to perfection and installs easily by applying heat for a few seconds by any household iron. ** Because our edge banding is made from real wood, from time to time we see some natural inconsistencies. IF YOU ARE NOT HAPPY with your roll because of natural variation that occurs in trees or poorly placed finger joints, PLEASE CONTACT US AND WE WILL SEND YOU A FREE ROLL. **

    • Brand: Beach Handiworks
    • ASIN: B076Z4J1L4
    • UPC: 666412023213

  • Forrest WW10407100 Woodworker II 10-Inch 40-tooth ATB .100 Kerf Saw Blade with 5/8-Inch Arbor

    This thin kerf table saw blade produces smooth as sanded rips and crosscuts in hardwoods up to 2" thick. For another option in the Forrest Woodworker II series, check out the ATB General Purpose Blade. The Woodworker II is a top-quality general purpose blade. This thin kerf version of the WWII is perfect for table saws under 3HP. Features: Teeth have 15 Degree alternating tooth bevel 20 degree face hook for easy feed Carbide tipped Produces smooth as sanded cuts

    • Brand: Forrest
    • ASIN: B0000223VR
    • UPC: 616576986824

  • Minwax 260924444 Interior Wood Gel Stain, 1/2 pint, Black

    Highlights: Size : 0. 5 Pint Coverage Area: 50 sq. ft. Color: Black Rich, uniform color Easy-to-use Non-drip formula Ideal for verticle surfaces For wood, veneer, fiberglass and more Application Method: Brush Suitable for application on interior wood surfaces Its unique non-drip formula makes application easy for vertical surfaces

    • Color: Black
    • Brand: Minwax
    • ASIN: B017NNJQRY
    • UPC: 027426260924

  • CMT 256.050.10 ITK Industrial Combination Saw Blade, 10-Inch x 50 Teeth 1FTG+4ATB Grindwith 5/8-Inch Bore

    This blade features a thin kerf, which makes it ideal for saws that are a bit underpowered, but at the same time this tool delivers great performance. You will be satisfied with the excellent price/quality ratio. The laser cut heavy-duty blade plate is hardened to allow for great resistance (46-48 Rockwell in hardness) and features expansion slots to reduce noise and anti-vibration design. The teeth are made of micrograin carbide to ensure long-lasting cutting performance and deliver smooth cut on wood and wood products. These are brazed to the blade body through a special trimetallic bond (copper-silver-copper), so that longer cut performance and resistance are guaranteed. Blade is delivered in a unique CMT plastic case.

    • Brand: CMT
    • ASIN: B000P4NTRC
    • UPC: 664252007851

  • Cherry Preglued 13/16" X 250' Wood Veneer Edgebanding Roll - Flexible Wood Tape, Easy Application Iron On with Hot Melt Adhesive. Smooth Sanded Finished. Made in USA

    High Quality Wood veneer edgebanding cherry Pre-glued iron on, size 13/16" X 250' (With high quality adhesive) and finely sanded to perfection. The wood edge banding roll can be applied with an iron, hot air blower or it can be applied with an edgebander machine. We offer the highest quality wood edge banding in the Market. We also offer many other wood species and sizes upon request ready for immediate delivery. An ordinary household iron is all you need to apply this premium hot-melt edge banding. Just position the edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated with a high-speed hot-melt glue that creates a permanent bond. They also are pre-sanded and readily accept stains and finishes.

    • Brand: Edge Supply
    • ASIN: B011S6X9ZM
    • UPC: 712048261489

  • Cherry Preglued 1 1/2" X 250' Wood Veneer Edgebanding Roll - Flexible Wood Tape, Easy Application Iron On with Hot Melt Adhesive. Smooth Sanded Finish. Made in USA

    High Quality Wood veneer edgebanding Cherry Pre-glued iron on, size 1-1/2" X 250' (With high quality adhesive) and finely sanded to perfection. The wood edge banding roll can be applied with an iron, hot air blower or it can be applied with an edgebander machine. We offer the highest quality wood edge banding in the Market. We also offer many other wood species and sizes upon request ready for immediate delivery. An ordinary household iron is all you need to apply this premium hot-melt edge banding. Just position the edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated with a high-speed hot-melt glue that creates a permanent bond. They also are pre-sanded and readily accept stains and finishes.

    • Brand: Edge Supply
    • ASIN: B012XJ6VU8
    • UPC: 739718518827