• Taylor 456712, Boat Cover Support System

    BOAT COVER SUPPORT SYSTEM helps extend the life of your boat cover by preventing water from pocketing. Includes 50 feet of webbing, quick release buckles, a boat cover support pole that snaps to the webbing and two hooks to attach to the transom.

    • Color: Black
    • Brand: Taylor Made Products
    • ASIN: B001449DS6
    • UPC: 796793941407

  • Carver 60008 Boat Cover Suppport System

    Eliminates virtually all possible areas that could collect water and allow it to pool, causing damage to the cover.  This system is designed for simplicity with two pre-installed, adjustable 20-foot straps that snap quickly to the rear tow hooks and one 40-foot adjustable strap to cradle the bow.  System fits up to 28-foot boats.  For pontoon boats, two systems are required and can easily be joined to create a perfect "frame" for the pontoon cover.  Each system comes with one adjustable (22" to 70") support pole with snap and vinyl end, system center, strap set and simple installation instructions.

    • Brand: Carver Industries
    • ASIN: B01DJ741OQ
    • UPC: 796793679744

  • Camco 41970 Boat Cover Support

    The Boat Cover Support is an easy to use telescoping support system that keeps your boat cover from sagging and allowing water to pool. When rain doesn't pool and go stagnant in your boat cover, it helps extend the life of the material. The Boat Cover Support is self-standing with support plates on the top and bottom, the bottom support plate also has a foam pad to prevent sliding and protect the boat. The Boat Cover Support adjusts heights easily from 30" to 50" in 2.5" increments to accommodate different styles of boats. The nylon strap assembly is 50-ft long and fits most boats up to 22 feet in length. It is easy to install and stores compactly when not in use. Camco also makes a full line of attachments that can be purchased and used with the telescoping support pole.

    • Brand: Camco
    • UPC: 014717419703

  • Budge BA-40 Black 26" - 64" Boat Cover Support Pole

    An economical way to support your boat or truck cover, this aluminum tension rod adjusts to any height between 26" and 64". The rubber foot at the base keeps the pole steady, while the plastic dome at the top holds the cover in place. The pole twists to lock to your desired length.

    • Color: Black
    • Brand: Budge
    • ASIN: B005UP394O
    • UPC: 018397115405

  • Attwood Corporation Dlx Cover Support 19' System

    Deluxe Boat Cover Support System - Up to 19' Boats--This system provides an easily adjustable, effective boat cover support to keep water from accumulating in the center of the boat cover. The support uses a 1" diameter telescoping center pole (28" to 48") and polyweb straps (1" wide, black) to form a double ridge line under the cover. The pole rests on a rubber foot and the web straps attach to the stern with non-marring hooks. Instructions are included.

    • Brand: attwood
    • ASIN: B001O0D6CO
    • UPC: 048903107952

  • Classic Accessories Boat Cover Support Pole (Black)

    Supports boat cover to prevent pooling of water and debris.

    • Color: Black
    • Brand: Classic Accessories
    • ASIN: B000OZTMB4
    • UPC: 772259080545

  • Vico Marine Support Pole + Boat Vent 3 + Pole Base (34" - 59") G59A-1 PBR BV3 BLK

    Our telescoping cam lock support poles have been tested to hold up to 170 lbs. That's over twice the weight of standard thumbscrew mooring poles. They have a die cast collar and stainless steel components. The aluminum tubing is anodized, heat treated, and has a ribbed profile for increased strength and lightweight. We use fully synthetic TPR rubber Grey bottom crutch tips that will not scuff or mar your boats flooring. Boat Vent 3 is an improvement on Boat Vent II, which made its name in the marine industry over the last two decades through adding value to covered boats by venting and tenting, preventing mildew and mold. Boat Vent 3 features four major improvements over Boat Vent II, including easier installation, more efficient venting, better grip, and adjustability. Molded from the highest UV inhibited plastic on the planet, it can be installed to virtually any boat cover. Our rubber swivel pole base makes installing your boat cover quick and easy. With the ability to swivel and hold the pole in place, you no longer have to climb in and out of your boat as you install your cover. The thermoplastic rubber gives the pad a firm grip, it's large base protects your flooring from damage caused by standard crutch tips and helps disperse the poles weight.

    • Brand: Vico Marine
    • ASIN: B010E8ORJM
    • UPC: 812599020938

  • KAKIT Waterproof All Seasons 600D Polyester Trailerable Boat Cover for 17-19'/20-22' V-Hull Tri-Hull Runabout,Free Boat Cover Support Kit & Storage Bag

    Kakit 600D Polyester Heavy Duty Trailerable Waterproof Boat Cover, Fit for 17-19 Foot V-Hull Tri-Hull Runabout Boat, with Free Support System & Storage Bag! ☛ Length: 17'-19' Beam width: up to 96" (Fit V-hull runabouts (outboards and I/O) with beam width to 96") ☛ Elastic Hem Around the bottoms for snug fit to your boat. ☛ Superior protection against dirt, pollution, scratches, UV rays and bad weather. ☛ 100% Waterproof. Durable 600D Polyester keeps your jeep dry even during heavy rain pours. ☛ Breathable material allows maximum evaporation of water under the cover, to keep your boat from mildew. ☛ No more Water Pooling! Support System designed for prevent water pooling, ensure better functionality and longer product life. What you got: 1 X Heavy Duty Boat Cover 1 X Support System 1 X 20*30cm Patching Fabric 1 X Hose with Strap 1 X Fishnet Storage Bag 1 X User Manual 30 Days Money Back Guarantee 3 Years Warranty.

    • Brand: KAKIT
    • ASIN: B076P51HLS
    • UPC: 611517988332

  • Taylor Made Products 925 84" Fiberglass Boat Cover Marine Support Bow

    Taylor Made Products 84" Fiberglass Boat Cover Marine Support Bow is mounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall .Super strong and flexible. Will not take a "set ." Cut to desired length. Shipped with rubber end covers.

    • Brand: Taylor Made Products
    • ASIN: B001HBKFHO
    • UPC: 040011349255

  • Taylor Made Products 55745 Marine Pontoon Boat Cover Support System

    Extend the life of your pontoon boat cover by preventing water from pocketing. This easily installed system includes two adjustable support poles (bright dip anodized - snap ends). 60ft. of 1" polypropylene webbing, quick release adjuster buckles and four injection molded hooks to secure to decking.

    • Brand: Taylor Made Products
    • ASIN: B0013JGNZS
    • UPC: 040011264909