• Traxxas 2423 23T Pinion Gear, 48P

    Gear, 23-T pinion (48-pitch) / set screw. Optional Traxxas pinion gears allow you to increase or decrease the final drive ratio and tune for different applications. Larger gears will result in higher speeds while smaller gears provide more torque. These are designed for use with 48-pitch spur gears and 3mm motor shafts. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

    • Brand: Traxxas
    • ASIN: B000HKH0R4
    • UPC: 020334242303

  • Apex RC Products 48 Pitch 20T 21T 22T 23T Aluminum Pinion Gear Set #9751

    Apex RC Products is a company of radio control hobby enthusiasts that creates and carries products we use ourselves. All of our products are high quality at a great value.

    • Brand: Apex RC Products
    • ASIN: B07D6DFYTG
    • UPC: 810718030547

  • Hot Racing NSG3223 23t Steel 32p Pinion Gear 5mm Bore

    Hot Racing hardened steel 23 tooth, 32 pitch pinion gear for motors with a 5mm shaftFEATURES: - CNC machined- Hardened steel to increased wear resistance and improve fatigue life- Nitrided to enhanced hardness corrosion resistanceYOU WILL RECEIVE: - One (1) pinion gear - One (1) M4x4mm setscrewREQUIREMENTS: - 2mm hex wrench to install setscrew- Removable thread lock (ex. blue Loctite) for setscrew- Motor with 5mm shaft- 32 pitch spur gearSPECIFICATIONS: - Tooth count: 23- Tooth pitch: 32 pitch- Tooth face width: 7mm- length: 14.5mm- For shaft: 5mmComment0.8 module is the same as 32 standard pitchdescription revised by: SN September 19, 2016

    • Brand: Hot Racing
    • ASIN: B00XF8CUWK
    • UPC: 787718673152

  • Traxxas 2423 Pinion Gear 23T 48P(3pcs) Slash 2WD Rustler Stampede Bandit VXL XL5

    SPECS--Outer Diameter: 14mm (9/16")//// Inner Diameter:---11mm (7/16") Shaft size 3.2mm///// Fits: Traxxas Rustler VXL/XL-5 / Stampede VXL/XL-5 / Bandit VXL/XL-5 / 1/10 Slash 2WD / 1/16 E-Revo VXL / 1/16 Slash VXL / 1/16 Summit VXL / 1/16 Rally VXL / 1/16 Ford Mustang Boss / 1/16 Kyle Busch Race Replica and Many More

    • Brand: Traxxas
    • ASIN: B076858L2S
    • UPC: 605483100355

  • Slash 58034-2-86T Tooth Spur Gear amp 23T Pinion Gear Set 48P Traxxas

    Slash 58034 86T TOOTH SPUR GEAR /// 23T TOOTH PINION GEAR SET /// come as picture

    • Brand: Traxxas
    • ASIN: B073KT4Z7J
    • UPC: 650415922727

  • Hot Racing CSG1823 23t 48p Hardened Steel Pinion Gear 1/8 Bore

    Hot Racing brushless Black steel 48 Pitch 23 Tooth Pinion Gear. FEATURES: CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass and Increase efficiency. Casehardened for durability. Heavy duty 4mm set screw for brushless powerYOU WILL RECEIVE: One 48 Pitch 23 Tooth Pinion Gear with 4mm set screwSPECIFICATIONS: Inner diameter: 1/8" Length 12mmdescription revised by: WP February 12, 2014

    • Brand: Hot Racing
    • ASIN: B01MA44OK0
    • UPC: 083745669367

  • Team Associated 1341 Factory Aluminum 23T 48P 1/8 Shaft Pinion Gear

    Replace your standard pinion gears with these lightweight, hard-anodized versions for slight weight savings, quicker identification, and longer life.

    • Brand: Team Associated
    • ASIN: B01B2UFFZQ
    • UPC: 784695013414

  • 48P 21T 22T 23T 24T 25T Pinion Gear with Screw Driver for 3.175mm Shaft 1/10 RC Brushless Brush Motor by MakerDoIt

    Q: Do you wanna make your RC happier? Are you looking for universal upgrade pinion gear for your RC car? A: We can help, we provide 3.175mm hole 48P pinion gear set comes with a set screw, they work well and have a secure fit with no modification needs. Package include: 1 X 48P 3.175mm 21T pinion gear 1 X 48P 3.175mm 22T pinion gear 1 X 48P 3.175mm 23T pinion gear 1 X 48P 3.175mm 24T pinion gear 1 X 48P 3.175mm 25T pinion gear 5 X 48P Screws 1 X Screwdriver Note: 💡【48P】is the pitch of each tooth on the pinion gear and the 21T 22T 23T 24T 25T is the number of teeth on the pinion gear. You have to make sure your spur gear and pinion gear have the same pitch, or the teeth won't mesh. 💡【3.175mm】The pinion gear shaft diameter or bore is 3.175mm, make sure your RC motor shaft have the same diameter. 💡Make sure you thread lock the grub screw. They are hard to find when they fall out. 💡Larger gears will result in higher speeds while smaller gears provide more torque. For quicker acceleration go for a smaller pinion gear (with fewer teeth) and a larger spur gear (with more teeth). Your car will accelerate off the mark very quickly with more torque, and you'll also benefit from cooler running temperatures, extending the life of your motor and ESC....

    • Color: Gold
    • Brand: MakerDoIt
    • ASIN: B07RVHN1WQ
    • UPC: 889838568193

  • Tamiya America, Inc AV Pinion Gear Set 22T/23T: CR01, TAM50357

    This is a pinion gear set for the Tamiya F-1's, the Madcap and the Avante 2001. FEATURES: -metal construction YOU WILL RECEIVE: -(1) 23 tooth 48P metric pinion gear -(1) 22 tooth 48P metric pinion gear NNA-5/19/94  

    • Brand: Tamiya
    • ASIN: B00061H6XW
    • UPC: 795571486864

  • 64P 21T 22T 23T 24T 25T Pinion Gear with Screw Driver for 3.175mm Shaft 1/10 RC Brushless Brush Motor by MakerDoIt

    Q: Do you wanna make your RC happier? Are you looking for universal upgrade pinion gear for your RC car? A: We can help, we provide 3.175mm hole 64P pinion gear set comes with a set screw, they work well and have a secure fit with no modification needs. Package include: 1 X 64P 3.175mm 21T pinion gear 1 X 64P 3.175mm 22T pinion gear 1 X 64P 3.175mm 23T pinion gear 1 X 64P 3.175mm 24T pinion gear 1 X 64P 3.175mm 25T pinion gear 5 X 64P Screws 1 X Screwdriver Note: 💡【64P】is the pitch of each tooth on the pinion gear and the 21T 22T 23T 24T 25T is the number of teeth on the pinion gear. You have to make sure your spur gear and pinion gear have the same pitch, or the teeth won't mesh. 💡【3.175mm】The pinion gear shaft diameter or bore is 3.175mm, make sure your RC motor shaft have the same diameter. 💡Make sure you thread lock the grub screw. They are hard to find when they fall out. 💡Larger gears will result in higher speeds while smaller gears provide more torque. For quicker acceleration go for a smaller pinion gear (with fewer teeth) and a larger spur gear (with more teeth). Your car will accelerate off the mark very quickly with more torque, and you'll also benefit from cooler running temperatures, extending the life of your motor and ESC....

    • Color: Gold
    • Brand: MakerDoIt
    • ASIN: B07RN4YJH9
    • UPC: 889838568216