• Hallmark Industries MA0460X-9A Deep Well Pump, 3.5", 1hp, 230V/60Hz/1Ph, 9 Stage, 240' Head Max, 25 GPM Max, 1.25"Npt, S.Shell C.I Intake, 10' Cable, No Check Valve, Stainless Steel

    Deep well pump, 3.5", 1Hp, 230V/60Hz/1pH, 9 stage, 240' head max, 25 GPM max, 1.25"Npt, uses. Shell C.I intake, 10' cable, no check Valve. Features & Technical Specifications: * 3.5" deep well submersible pump, 1 HP, 230V, 5.8Amps, 9stage, 1-1/4” NPT discharge. * Max OD 3.8", fits in a 4" well casing.* Industrial grade heavy duty, also good for home usage* Patented impeller & 9 stage design. 25 GPM max, rated 13 gpm, 220 ft head .* 220 feet max head is for open water tanks. Refer to the 'Pump Selection Guide' for the pressure tank applications.* Patented impeller design provides extended pump life and heavy flow under the worse circumstances.* This pump last much longer than the all-plastic-bottom-suction pump, which weighs half of this pump (same HP).* Water temperature: (32 ~113oF) Trans medium’s Ph: 6.5~ 8.5* Shell, motor shaft are made with stainless steel to ensure corrosion resistance. High quality sealed ball bearings guarantee its excellent performance.* Hermetically sealed motor has a built in capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.* Built in control box. This pump DOES NOT require an external control box!* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, and uses less ...

    • Brand: Hallmark Industries
    • ASIN: B07CCR91BQ

  • Hallmark Industries MA0431X-18A-E Pump, Deep Well Submersible, 3 hp, 230VAC/60hz/1ph, 35 Gpm, Stainless Steel, Heavy Duty

    Hallmark Industries Deep Well Pump, Submersible, 3 Hp, 230VAC/60hz/1ph, 35 Gpm, S.S Steel, Heavy Duty.Features & Technical Specifications:* 4" deep well submersible pump, with external control box. Fits a 5" or larger well casing. * 220V, 3HP, 17 Amps, 1 phase, 60 hz, 625 feet max head, 35 gpm Max, mid intake. * 625' head is to an open tank. Please read 'Pump Selection Guide' for using pressure tanks.* Patented impeller design provides extended pump life and heavy flow under the severe circumstances.* Solid stainless steel body with heavy duty cast iron discharge.Industrial grade heavy duty, also good for home usage. * 3 HP capacitor start, and thermal protection switch, for longer life and powerful start.* Comes with an external control box. Shipped with pump and motor separated. Assembly may require.* This pump uses high quality UL approved motor, UL file No.: E233961* This is a 3 wire pump with 4-Wire (3 wires + ground wire), 10' long electric cord, installation tape & electric tape kits are included.* 1-1/4” NPT discharge. Include a built in check valve.* Heavy-duty thermoplastic impellers, diffusers, and intake screen.* High efficiency, hermetically sealed motor is thermally protected to prevent overheating, and uses less energy.* Submersible design eliminates the need for...

    • Brand: Hallmark Industries
    • ASIN: B00LW4KHI8

  • Hallmark Industries MA0459X-14A Deep Well Pump, 3" (3.3 Max), 3/4 HP, 230V/60Hz/1Ph, 14 Stage, 270' Head Max, 13 GPM Max, 1"Npt, S.Shell C.I Intake, 10' Cable, w/Check Valve, Stainless Steel

    Deep well pump, 3", 3/4Hp, 230V/60Hz/1pH, 14 stage, 270' head max, 13 GPM max, 1"npt, stainless steel, 10' cable, W/check Valve.Features & Technical Specifications:* 3 inch deep well submersible pump. Max OD 3.3", fits in a 4" well casing.* 3/4 HP, 230V, 4.6 Amps, 1” NPT discharge. 247 max head, heavy duty. * Industrial grade heavy duty, also good for home usage. Heavy duty UL certified motor. * Patented impeller & 14 stage design. 13 GPM max, 247 ft head .* 247' head is for open water tank. Head for pressure tanks will be lower! Buyer MUST read the 'Pump Selection Guide'!* Patented impeller & UL approved motor designs ensure extra long pump life, great flow and head.* Shell, motor shaft are made with stainless steel to ensure corrosion resistance. * High quality sealed ball bearings guarantee its excellent performance.* Hermetically sealed motor has a built in capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.* Built in control box. This pump DOES NOT require an external control box!* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, and uses less energy* This is a 2 wire pump. 10' long electric cord included.* Heavy-duty thermoplastic impellers, diffusers, and intake screen.* High efficienc...

    • Brand: Hallmark Industries
    • ASIN: B07BPC1XT6

  • Hallmark Industries MA0419X-12AEXT Pump, 4" Deep Well Submersible, 2 hp, 230VAC/60Hz/1Ph, 35 GPM Max, Stainless Steel, with Control Box, Stainless Steel

    Hallmark Industries MA0419X-12AEXT pump, 4 inch deep well submersible, 2 HP, 230VAC/60Hz/1pH, 35 GPM max, stainless steel, with control box Features & Technical Specifications: * 4" deep well submersible pump. Fits 5" or bigger well casing (will not fit 4" well casing). * 2 HP, 230V, 10.2 Amps, 12 stage, 1-1/4” NPT discharge. * Industrial grade heavy duty, also good for home usage. * Patented impeller & 12 stage unique design provide a much longer pump life than other brands. * 35 GPM max & 400ft head are greater than almost all other 2HP well pumps, and comparable to 3HP pumps, but uses less electricity. * 400 ft is total water head. * Water temperature: (32 ~113oF) Trans medium’s Ph: 6.5~ 8.5* Shell, motor shaft are made with stainless steel to ensure corrosion resistance. High quality sealed ball bearings guarantee its excellent performance.* Hermetically sealed motor has thermal protection to prevent overheating, for longer life and powerful start.* This pump comes with a starter box (control box).* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, and uses less energy* This is a 3 wire pump with ground wire (total 4 wire) * 10' long electric cord, installation tape & electric tape kits are all included in the package. * Heavy-duty th...

    • Brand: Hallmark Industries
    • ASIN: B07HT9SX2C

  • Hallmark Industries MA0343X-4A Deep Well Submersible Pump, 1/2 hp, 230V, 60 Hz, 25 GPM, 150' Head, Stainless Steel, 4"

    Deep Well Submersible Pump, 1/2HP, 220V/60HZ/1PH, 25 GPM Max, 150 Feet MAX, S.S. SHELL C.I Intake, 1.25 NPT discharge. Brand new product in the box! NOT 'Manufacturer Refurbished'. We are based in the U.S., customer services, tech support & warranty are handled in the U.S. FEATURES: * 4" deep well S.S submersible pump, 1/2HP, 220V, 3.3 Amps, 150 Feet MAX Head, 25 GPM Max * Fits a 5" or larger well casing. For 4" casing, use pump MA0460X-9A, or MA0459X-14A; * Patented impeller provides heavy duty higher performance and longer life than most other well pumps. * Solid stainless steel body with heavy duty cast iron discharge * Industrial grade heavy duty, also good for home usage. * Built in 1/2 HP capacitor start, and thermal protection switch. For longer life and powerful start. * Built in control box. This pump DOES NOT require an external control box! * This pump uses high quality UL approved motor, UL file No.: E233961 * This is a 2 wire pump with 3-Wire (2 wires + ground wire),10' long electric cord included * 1.25" NPT discharge * Heavy-duty thermoplastic impellers, diffusers, and intake screen. * This is a 2 wire pump with 3-Wire (2 wires + ground wire). * Submersible design eliminates the need for priming and creates quiet operation. * High efficiency and hermetically sealed...

    • Brand: Hallmark Industries
    • ASIN: B00NTT2JW6

  • Berkeley P43B0020A2-C 4" XE Submersible Motors 2HP 3W 1PH 230V

    Berkeley P43B0020A2-C 4" XE Submersible Motors 2 Horse Power, 3-Wire, 1 Phase, 230 Volts. (1 1/2 HP and below models utilize a 48" lead. 2 HP and above models utilize a 100" lead) Model XE SeriesTM PENTEK® XE SeriesTM Residential 4" Submersible Motor Series PENTEK® XE Series submersible 4" high-thrust motors are built with the latest design, manufacturing and testing technology. They feature laser-welded 304L Stainless Steel construction, higher thrust capacities, and higher efficiencies. These motors incorporate "encapsulated, epoxy stator design," and professional grade Class F insulation provides longer life in harsh environments. Each motor is 100% factory pressure and run tested to support our quality standards. Key features  Large high-performance 700# Kingsbury thrust bearing design allow higher thrust loads  Designed to provide many years of service under severe-duty opration  Permanent Split Capacitor (PSC) insures quiet operation and improved operating efficiency  All stainless-steel exterior  Professional-grade Class F compliant motor insulation allows for longer service life  Equipped with Surge Arrestor  Automatic Thermal Protection Also Available in Coalbed Methane Series -- Please Call us for Details

    • Brand: Berkeley
    • ASIN: B00NJ13I1K
    • UPC: 697666708137

  • Mako Pumps TV-3211-21 3" Discharge Effluent Pump, 230V, 1ph, 1 hp with Attached Float

    Mako Pumps TV-3211-21 3" Discharge Effluent Pump 230V 1ph 1hp with Attached Float . Applications: Effluent/Wastewater, Insulation Class B, 3450 RPMs, SUS304 Motor Housing, FC-200 Impeller, FC-200 Volute, SUS403 Rotor, 316SS Hardware, BUNA “N” O-Rings, Roller Bearings, SiC/SiC CA/CE Mechanical Seals, Vortex Impeller, Solid Size: 1.25”, 3” Discharge, 2P Motor, 1 Phase, 23 ft cable, Auto-cut Protection.

    • Brand: Mako Pumps
    • ASIN: B07F6L7FJ5

  • Baldor Electric SUL50154SM, 1.5HP, 1800 RPM, 1PH, 110-120V/230V, 180TY Frame, Standard Flange, Foot Mount, TENV, Submersible Motor

    Baldor Electric SUL50154SM, 1.5HP, 1800 RPM, 1PH, 110-120V/230V, 180TY Frame, Standard Flange, Foot Mount, TENV, Submersible Motor

    • Brand: Baldor Electric
    • ASIN: B07FNDHVZW

  • Myers Rustler 2NFL52-12-P4 4" Submersible Water Well Pump and Motor 12GPM 2 Wire 1/2HP 1PH 230V

    Myers Rustler Series (NFL) 2NFL52-12-P4 4" Submersible Water Well Pump and Motor, 12 Gallons Per Minute, 2 Wire, 1/2 Horse Power, 1 Phase, 230 Volts. Model Rustler Series 4" Composite and Stainless Steel Submersible Pump Series with PENTEK XE Series Motor. The Rustler 4" Submersible pump is one of the most popular models in the Myers line. They have an exceptional history of durability and trouble-free operation. Stainless steel shell with composite intake and discharge design, and self-lubricating impellers offer the best service for extreme conditions. The Rustler also includes the PENTEK® XE SeriesTM high-thrust motor for efficient performance and years of extended service. Key features  Premium 4" submersible pump series field proven and preferred by industry pros.  Self-lubricating impellers resist abrasion from grit and sand -- outlasts the competition.  Features the high-thrust PENTEK XE motor for the ultimate in power, efficient performance and longer life.  Thermal overload and lightning protected.  Built-in eyelet for safety line connection

    • Brand: Myers
    • ASIN: B00NJ26MHQ
    • UPC: 697666708243

  • Grundfos 10S15-21 91545215 4" Submersible Water Well Pump and Motor 10GPM 1.5HP 230V 1Ph 3 Wire

    Grundfos 91545215. 1-1/2HP 230V 1-PHASE SUBMERSIBLE PUMP W/3-WIRE MOTO

    • Brand: Grundfos
    • ASIN: B00NY3YJCK
    • UPC: 697666710093

  • Zoeller 3137-0003, Model D3137 High Temperature Submersible Pump, 0.5 HP, 230V, 1PH, Iron, Automatic, 15 ft. Cord, 1-1/2 Discharge

    Specification: Submersible Pumps for Use in Dewatering ApplicationsIntermittent use up to 200° F(93°C). All models are designed to meet specifications with assurance by using high temperature parts rated for intermittent 200° F (93°C ) contact. High temperature switch components rated for intermittent service up to 200° F (93°C) Available in a variety of styles and performances All models built to last High temperature motor leads and thermal overload protection 100% corrosion-resistant, powder coated epoxy finish 10 ft (3 m) cord, high temperature, adjus float operated mechanical switch mounts directly to the discharge pipe 1-1/2", 2" or 3" discharge Adjus float switch is not intended for continuous contact with 200° F (93°C ) water. All stainless steel fittings 100% factory tested and approvedTypical Installations: Boiler blow down Hot water transfer Plant wash down Transformer vaults Industrial steam cleaning Switch Data: 16 guage, 2 conductor SOOW switch cordage Float housing constructed of high impact ABS 13.0 Amps (max) steady state Intermittent direct contact with up to 200° F (93°C ) water Turbulence resistant float switch Adjus pumping range Unlimited repetitive exposures are permissible for applications below 180° F (82°C)

    • ASIN: B07G1B3HTT

  • Zoeller 2282-0006, Model BE2282 High Temperature Submersible Pump, 0.5 HP, 230V, 1PH, 10' VLFS, 2 Discharge, 15 ft. Cord, Automatic

    Specification: Submersible Pumps for Use in Dewatering ApplicationsIntermittent use up to 200° F(93°C). All models are designed to meet specifications with assurance by using high temperature parts rated for intermittent 200° F (93°C ) contact. High temperature switch components rated for intermittent service up to 200° F (93°C) Available in a variety of styles and performances All models built to last High temperature motor leads and thermal overload protection 100% corrosion-resistant, powder coated epoxy finish 10 ft (3 m) cord, high temperature, adjus float operated mechanical switch mounts directly to the discharge pipe 1-1/2", 2" or 3" discharge Adjus float switch is not intended for continuous contact with 200° F (93°C ) water. All stainless steel fittings 100% factory tested and approvedTypical Installations: Boiler blow down Hot water transfer Plant wash down Transformer vaults Industrial steam cleaning Switch Data: 16 guage, 2 conductor SOOW switch cordage Float housing constructed of high impact ABS 13.0 Amps (max) steady state Intermittent direct contact with up to 200° F (93°C ) water Turbulence resistant float switch Adjus pumping range Unlimited repetitive exposures are permissible for applications below 180° F (82°C)

    • ASIN: B07G19DGTG

  • Subm Pump Mtr, 1ph, 1/2hp, 230V, 4 In, 3 Wire

    'Submersible Pump Motor, Capacitor-Start, Totally Enclosed Nonventilated, 1/2 HP, 3450 RPM, 230 Volts, 1 Phase, Service Factor 1.60, Full Load Amps 5.0/3.5, Max SF Amps 6.0/4.3, Thrust Rating 300 Lb, Number of Wires 3, Thermal Protection Auto, Mounting NEMA, Diameter 4 In, Control Box Required G2198445, Amps for CSIR/CSCR Control Boxes 6.0/4.3'

    • Brand: Franklin
    • ASIN: B00F0YMJFK
    • UPC: 737946889399

  • Zoeller 2137-0006, Model BE2137 High Temperature Submersible Pump, 0.5 HP, 230V, 1PH, 10' VLFS, 1-1/2 Discharge, 15 ft. Cord, Automatic

    Specification: Submersible Pumps for Use in Dewatering ApplicationsIntermittent use up to 200° F(93°C). All models are designed to meet specifications with assurance by using high temperature parts rated for intermittent 200° F (93°C ) contact. High temperature switch components rated for intermittent service up to 200° F (93°C) Available in a variety of styles and performances All models built to last High temperature motor leads and thermal overload protection 100% corrosion-resistant, powder coated epoxy finish 10 ft (3 m) cord, high temperature, adjus float operated mechanical switch mounts directly to the discharge pipe 1-1/2", 2" or 3" discharge Adjus float switch is not intended for continuous contact with 200° F (93°C ) water. All stainless steel fittings 100% factory tested and approvedTypical Installations: Boiler blow down Hot water transfer Plant wash down Transformer vaults Industrial steam cleaning Switch Data: 16 guage, 2 conductor SOOW switch cordage Float housing constructed of high impact ABS 13.0 Amps (max) steady state Intermittent direct contact with up to 200° F (93°C ) water Turbulence resistant float switch Adjus pumping range Unlimited repetitive exposures are permissible for applications below 180° F (82°C)

    • ASIN: B07G194ZB8

  • Grundfos 5S15-31 81545315 4" Submersible Water Well Pump and Motor 5GPM 1.5HP 230V 1Ph 3 Wire

    Grundfos 5S15-31, Material #81545315, 1-1/2 Horse Power, 1 Phase, 230 Volts, 4" Dia, 3-Wire, 5 gallon per minute. The complete pump DOES NOT include control box. Control box sold separately. Control Box required for 3-wire single phase applications. STAINLESS STEEL CONSTRUCTION Grundfos submersibles feature rugged and durable stainless steel construction for all vital pump components. Impellers, diffusers, shafts, vanes, cable guards, couplings...even the nuts and bolts are stainless steel. Grundfos' 4-inch pump systems include the stainless steel pump, motor, and control box and are delivered ready to install. Computer-aided design and manufacturing techniques ensure that each pump is built to exacting tolerance and performs to industry-leading standards. Grundfos state-of-the-art production equipment includes extensive use of robotics and advanced quality assurance procedures. You can rely on quality Grundfos' groundwater products for outstanding pump performance and best value. SUBMERSIBLES 4-INCH and LARGER WELLS The 4-inch submersibles line covers all flow requirements from 1.2 to 95 gpm and heads to 2000 feet. This broad range ensures proper pump selection for all domestic groundwater system applications.

    • Brand: Grundfos
    • ASIN: B00ODBNEC8
    • UPC: 697666711236

  • Zoeller 2057-0006, Model BE2057 High Temperature Submersible Pump, 0.3 HP, 230V, 1PH, 10' VLFS, 1-1/2 Discharge, 15 ft. Cord, Automatic

    Specification: Submersible Pumps for Use in Dewatering ApplicationsIntermittent use up to 200° F(93°C). All models are designed to meet specifications with assurance by using high temperature parts rated for intermittent 200° F (93°C ) contact. High temperature switch components rated for intermittent service up to 200° F (93°C) Available in a variety of styles and performances All models built to last High temperature motor leads and thermal overload protection 100% corrosion-resistant, powder coated epoxy finish 10 ft (3 m) cord, high temperature, adjus float operated mechanical switch mounts directly to the discharge pipe 1-1/2", 2" or 3" discharge Adjus float switch is not intended for continuous contact with 200° F (93°C ) water. All stainless steel fittings 100% factory tested and approvedTypical Installations: Boiler blow down Hot water transfer Plant wash down Transformer vaults Industrial steam cleaning Switch Data: 16 guage, 2 conductor SOOW switch cordage Float housing constructed of high impact ABS 13.0 Amps (max) steady state Intermittent direct contact with up to 200° F (93°C ) water Turbulence resistant float switch Adjus pumping range Unlimited repetitive exposures are permissible for applications below 180° F (82°C)

    • ASIN: B07G18KBW2

  • Grundfos 16S10-10 10154510 4" Submersible Water Well Pump and Motor 16GPM 1HP 230V 1Ph 3 Wire

    Grundfos 16S10-10, Material #10154510, 1 Horse Power, 1 Phase, 230 Volts, 4" Dia, 3-Wire, 16 gallon per minute. The complete pump DOES NOT include control box. Control box sold separately. Control Box required for 3-wire single phase applications. The complete pump includes pump and motor. These parts are also available seperately, call us directly for pricing information. STAINLESS STEEL CONSTRUCTION Grundfos submersibles feature rugged and durable stainless steel construction for all vital pump components. Impellers, diffusers, shafts, vanes, cable guards, couplings...even the nuts and bolts are stainless steel. Grundfos' 4-inch pump systems include the stainless steel pump, motor, and control box and are delivered ready to install. Computer-aided design and manufacturing techniques ensure that each pump is built to exacting tolerance and performs to industry-leading standards. Grundfos state-of-the-art production equipment includes extensive use of robotics and advanced quality assurance procedures. You can rely on quality Grundfos' groundwater products for outstanding pump performance and best value. SUBMERSIBLES 4-INCH and LARGER WELLS The 4-inch submersibles line covers all flow requirements from 1.2 to 95 gpm and heads to 2000 feet. This broad range ensures proper pump sel...

    • Brand: Grundfos
    • ASIN: B00NYA6UIE
    • UPC: 697666710390

  • Zoeller 3098-0004, Model E3098 High Temperature Submersible Pump, 0.5 HP, 230V, 1PH, 15' Cord, Nonautomatic, 1-1/2 Discharge

    Specification: Submersible Pumps for Use in Dewatering ApplicationsIntermittent use up to 200° F(93°C). All models are designed to meet specifications with assurance by using high temperature parts rated for intermittent 200° F (93°C ) contact. High temperature switch components rated for intermittent service up to 200° F (93°C) Available in a variety of styles and performances All models built to last High temperature motor leads and thermal overload protection 100% corrosion-resistant, powder coated epoxy finish 10 ft (3 m) cord, high temperature, adjus float operated mechanical switch mounts directly to the discharge pipe 1-1/2", 2" or 3" discharge Adjus float switch is not intended for continuous contact with 200° F (93°C ) water. All stainless steel fittings 100% factory tested and approvedTypical Installations: Boiler blow down Hot water transfer Plant wash down Transformer vaults Industrial steam cleaning Switch Data: 16 guage, 2 conductor SOOW switch cordage Float housing constructed of high impact ABS 13.0 Amps (max) steady state Intermittent direct contact with up to 200° F (93°C ) water Turbulence resistant float switch Adjus pumping range Unlimited repetitive exposures are permissible for applications below 180° F (82°C)

    • ASIN: B07G18FLJ2

  • Grundfos 5S30-48DS 8114548 4" Submersible Water Well Pump and Motor 5GPM 3HP 230V 1Ph 3 Wire

    Grundfos 8114548 5S30-48DS, 5 GPM, 3 Wire, 3 HP, Single Phase, 230 V

    • Brand: Grundfos
    • ASIN: B00ODCC2ZW
    • UPC: 697666711298

  • Zoeller 3137-0004, Model D3137 High Temperature Submersible Pump, 0.5 HP, 230V, 1PH, Iron, Automatic, 15 ft. Cord, 1-1/2 Discharge

    Specification: Submersible Pumps for Use in Dewatering ApplicationsIntermittent use up to 200° F(93°C). All models are designed to meet specifications with assurance by using high temperature parts rated for intermittent 200° F (93°C ) contact. High temperature switch components rated for intermittent service up to 200° F (93°C) Available in a variety of styles and performances All models built to last High temperature motor leads and thermal overload protection 100% corrosion-resistant, powder coated epoxy finish 10 ft (3 m) cord, high temperature, adjus float operated mechanical switch mounts directly to the discharge pipe 1-1/2", 2" or 3" discharge Adjus float switch is not intended for continuous contact with 200° F (93°C ) water. All stainless steel fittings 100% factory tested and approvedTypical Installations: Boiler blow down Hot water transfer Plant wash down Transformer vaults Industrial steam cleaning Switch Data: 16 guage, 2 conductor SOOW switch cordage Float housing constructed of high impact ABS 13.0 Amps (max) steady state Intermittent direct contact with up to 200° F (93°C ) water Turbulence resistant float switch Adjus pumping range Unlimited repetitive exposures are permissible for applications below 180° F (82°C)

    • ASIN: B07G181TWS

  • Grundfos 5S20-39DS 8114539 4" Submersible Water Well Pump and Motor 5GPM 2HP 230V 1Ph 3 Wire

    Grundfos 8114539 5S20-39DS, 5 GPM, 3 Wire, 2 HP, Single Phase, 230 V

    • Brand: Grundfos
    • ASIN: B00ODC0J7K
    • UPC: 697666711267

  • Zoeller 2098-0006, Model BE2098 High Temperature Submersible Pump, 0.5 HP, 230V, 1PH, 10' VLFS, 1-1/2 Discharge, 15 ft. Cord, Automatic

    Specification: Submersible Pumps for Use in Dewatering ApplicationsIntermittent use up to 200° F(93°C). All models are designed to meet specifications with assurance by using high temperature parts rated for intermittent 200° F (93°C ) contact. High temperature switch components rated for intermittent service up to 200° F (93°C) Available in a variety of styles and performances All models built to last High temperature motor leads and thermal overload protection 100% corrosion-resistant, powder coated epoxy finish 10 ft (3 m) cord, high temperature, adjus float operated mechanical switch mounts directly to the discharge pipe 1-1/2", 2" or 3" discharge Adjus float switch is not intended for continuous contact with 200° F (93°C ) water. All stainless steel fittings 100% factory tested and approvedTypical Installations: Boiler blow down Hot water transfer Plant wash down Transformer vaults Industrial steam cleaning Switch Data: 16 guage, 2 conductor SOOW switch cordage Float housing constructed of high impact ABS 13.0 Amps (max) steady state Intermittent direct contact with up to 200° F (93°C ) water Turbulence resistant float switch Adjus pumping range Unlimited repetitive exposures are permissible for applications below 180° F (82°C)

    • ASIN: B07G17T4C7

  • Grundfos 16S50-38 10114538 4" Submersible Water Well Pump and Motor 16GPM 5HP 230V 1Ph 3 Wire

    Grundfos 10114538 16S50-38, 16 GPM, 3 Wire, 5 HP, Single Phase, 230 V

    • Brand: Grundfos
    • ASIN: B00O242PAS
    • UPC: 697666710727

  • Zoeller 3282-0003, Model D3282 High Temperature Submersible Pump, 0.5 HP, 230V, 1PH, 15' Cord, Automatic, 2 Discharge

    Specification: Submersible Pumps for Use in Dewatering ApplicationsIntermittent use up to 200° F(93°C). All models are designed to meet specifications with assurance by using high temperature parts rated for intermittent 200° F (93°C ) contact. High temperature switch components rated for intermittent service up to 200° F (93°C) Available in a variety of styles and performances All models built to last High temperature motor leads and thermal overload protection 100% corrosion-resistant, powder coated epoxy finish 10 ft (3 m) cord, high temperature, adjus float operated mechanical switch mounts directly to the discharge pipe 1-1/2", 2" or 3" discharge Adjus float switch is not intended for continuous contact with 200° F (93°C ) water. All stainless steel fittings 100% factory tested and approvedTypical Installations: Boiler blow down Hot water transfer Plant wash down Transformer vaults Industrial steam cleaning Switch Data: 16 guage, 2 conductor SOOW switch cordage Float housing constructed of high impact ABS 13.0 Amps (max) steady state Intermittent direct contact with up to 200° F (93°C ) water Turbulence resistant float switch Adjus pumping range Unlimited repetitive exposures are permissible for applications below 180° F (82°C)

    • ASIN: B07G17S48C