• ARP 2344301 Pro Series Cylinder Head Studs, With 12-Point Style Nuts, For Select Chevrolet Small Block Applications

    ARP uses a premium grade 8740 alloy, which is rated far superior to "aircraft" quality, for their Pro Series cylinder head studs. Each stud is placed vertically in special racks and precisely heat-treated to 200,000 psi to ensure complete heat penetration. Then the studs are centerless ground to make them as close to perfectly concentric as possible, unlike lesser quality studs. Because ARP studs are manufactured to such exacting tolerances, you will note that gaskets and cylinder heads literally glide into position and are perfectly aligned -- something that won't happen with inferior quality head studs. By being thread rolled after heat-treat, these studs have about 1000% (that's ten times) better fatigue strength than those studs that are threaded prior to heat-treat (a very common industry practice). It costs a lot more to do it this way, because it's tough on tooling, but the results are well worth the extra effort. This cylinder head stud kit comes complete with premium quality parallel ground washers and compact 12-point style nuts for select Chevrolet small block applications (23 degree OEM cast iron and aluminum Chevrolet, Gen III Vortec/Truck; AIrflow Research, Brownfield; Brodix -8, -10, -11, Track I, Dart Sprotsman and Dart II and most Edelbrock, Trick Flow).

    • Brand: ARP
    • ASIN: B000CFQ642
    • UPC: 672036009021

  • Steel Dragon Tools Replacement Camera Head for 710DN Pipe Inspection Camera

    Steel Dragon Tools Replacement Camera Head for 710DN Pipe Inspection CameraThis is a replacement camera head for the Steel Dragon Tools 710DN Pipe Inspection Camera. The camera head is waterproof and enclosed in a stainless-steel housing. The high-resolution camera has a 120-degree viewing angle. The lens is protected by scratch-proof Sapphire Glass and features 12 adjustable LED lights. The camera head is flexible but does not articulate.Specifications:Waterproof stainless steel housing.Inspection camera can stay submerged for long periods of time.Flexible head for navigating corners. Does not articulate.Camera Size: 1-inch diameter.Camera Head: 23 mm x 120 mm.View Angle: 120 Degrees.Sapphire Glass scratch-proof lens.Features 12 dimmable LED lights.Camera Sensor Size: 1/4"Camera Operating Temperatures: 14F to 122F (-10C to 50C).

    • Brand: Steel Dragon Tools
    • ASIN: B072PY975D
    • UPC: 745528406919

  • For Chevy Small Block 302/327/350/383/400 SBC 200cc Intake 68cc Straight Aluminum Bare Cylinder Head

    Increasing your engine's efficiency is a major way to improve performance and horsepower; the addition of performance-oriented aftermarket heads can greatly improve your engine's output by enhancing airflow and combustion efficiency.Package Included:1 X Cylinder HeadCompatible with:Small Block Chevy EnginesPerfect fits for SBC engines such as 302, 327, 350, 383 and 400 small block chevy engines up to 1986Notes:This head has a thick deck design so they can be used on nitrous, turbocharged and supercharged applicationsDual pattern valve covers will accept either center bolt or perimeter bolt valve coversWill fits many popular cars such as Camaro Z28, Chevelle, Monte Carlo, Hot Rods, Street Rods and many more applicationThis cylinder head does not have 400 stem holes. May require drilling if necessaryValves, Springs, Retainers, Hardware not Included23 Degree Intake & Exhaust Valve Angles

    • Color: Metallic
    • Brand: Auto Dynasty
    • ASIN: B07HHR124X

  • Brodix 1321000 SBC 225cc D/S Heads68cc 2.08/1.60 Assembled

    The Brodix Dragon Slayer series small block Chevy aluminum cylinder heads are the definition of economical Out-of-the-Box horsepower the 23 degree Dragon Slayer DS 225 series cylinder head comes standard with CNC ported combustion chambers allowing this port to flow over 300 CFM at .600'' cam lift. Every casting is poured from a-356 virgin aluminum and tested before Brodix utilizes their in-house processes such as finish machining and heat treating to assure that you receive the best products for your hard-earned money. Solid, phosphorous bronze guides are used to reduce valve leakage and oil consumption. The ductile Iron valve seats are installed for use with unleaded fuel. This head is also milled and drilled on the ends for accessory mounts and uses the traditional perimeter-style 4-bolt pattern valve cover and only offered with the straight spark plug angle configuration. The best thing about this Big flowing head is that All standard components such as rockers, lifters and intake manifold may be used sold in pairs. 

    • Brand: Brodix
    • ASIN: B00TO6EC5A
    • UPC: 012408004917

  • Edelbrock 2506 INTAKE MANIFOLD

    Now you can get legendary Edelbrock intake manifold performance designed specifically for demanding marine applications. These marine intake manifolds feature a brass lined front water crossover and two brass flange inserts to cover the rear water openings in the cylinder heads. The brass lined crossover and inserts protect the aluminum from salt water corrosion. . ** It delivers maximum power and a broad torque curve for high-performance marine applications. Carb pad will accept square-bore carbs without adapters. Recommended intake gasket: Edelbrock #7201.

    • Brand: Edelbrock
    • ASIN: B00J3VG39Y
    • UPC: 085347025060

  • Dynatech 796-00100 SBC 23 Degree Ti Stahl Pattern Adapters

    These 5/8" billet aluminum adapter plates bolt to your standard Fits Chevy 23° cylinder heads and allow the use of Stahl pattern header flanges. Includes plates and hardware for both heads.  Port measures 1-1/8" x 1-1/8" Item Details1.25" x 1.25" ports

    • Brand: Dynatech
    • ASIN: B005JV9EVG
    • UPC: 800571126570

  • Edelbrock 2504 INTAKE MANIFOLD

    Now you can get legendary Edelbrock intake manifold performance designed specifically for demanding marine applications. These marine intake manifolds feature a brass lined front water crossover and two brass flange inserts to cover the rear water openings in the cylinder heads. The brass lined crossover and inserts protect the aluminum from salt water corrosion.. ** It delivers maximum power and a broad torque curve for high-performance marine applications. Carb pad will accept square-bore carbs without adapters. Recommended intake gasket: Edelbrock #7201.

    • Brand: Edelbrock
    • ASIN: B00J3VG678
    • UPC: 085347025046

  • zzyks High-Pressure Pedal Pump, Mini Portable, Bicycle, Mountain Bike, Electric car Pump

    Thank You Very Much For Choosing Our Store,!We Will Continue To Provide You With More And Better Products!Features:Adequate pressure, large air output, high pressure, saving manpower, suitable for sports balls and inflatable toys.Detailed description:Non-slip foldable footrest, folding foot pad: The bump design makes the bicycle pump more stable, easy to inflate the food, gently press the pedal, put down the steel ring, and the bicycle pump reaches the stretched state, which can be inflated. It collapses when it is convenient to store.High quality hose: Our tire pump hose is antifreeze, high temperature resistant, long service life, durable, beautiful and durable, not easy to tear, strong toughness and hard to be hard.Aluminum alloy inner and outer cylinder: Made of high-strength aluminum alloy, the floor bicycle tire pump is more durable, wear-resistant and smooth in surface texture.specificationSize: 65*23cmWeight: 910gColor: Black White BlueMaterial: aluminum alloy barrelPacking: Inflator*1If You Have Any Questions, Please Feel Free To Contact Our Customer Service Team!Our Team Will Provide The Best Quality Service For Fans.Now, Please Add Me To The Shopping Cart And Take Me Home!

    • Brand: zzyks
    • ASIN: B07TF24W5G
    • UPC: 656497234833