• Tipton 13 Piece Rifle Brass Jag Set

    These 13 solid brass cleainig jags are the fastest way to thoroughly clean, dry, or oil the bore. Each jag is designed to provide a tight fit between the patch and the bore, ensuring optimal performance. Made With industry standard 8/32 threads (5/40 threads on .17 cal) they will fit most brands of cleaning rods and should provide years of service. Kit includes 17, 22, 243/6.5mm, 270/7mm, 30, 338/8mm, 35/9mm, 375, 40, 44, and 45 caliber jags.

    • Brand: Tipton
    • ASIN: B0000C1COV
    • UPC: 661120325000

  • Hornady 546228 DIESET 2 223 REM Remington Custom Grade Reloading DIE Set (Series I Two-Die Set) (.224)

    Custom-grade rifle dies begin as specially selected steel that's hand-inspected both before and after it's delivered. The steel is then Heat-Treated to ensure the durability needed to provide a lifetime of reloading. Then the inside surface of each sizing die is carefully hand-polished to a mirror finish. The result is a die so smooth, guaranteed to never scratch a case. Before Assembly, every part of every die is hand-inspected and a protective coating is applied to prevent moisture damage during shipping. The result is the most advanced reloading die set available today. Elliptical expander significantly reduces the friction and case-neck stretch associated with other expanders. It threads on so it can't pull loose and eliminates the need for a separate expander die for "necking-up up" to the next larger caliber. Sliding, in-line seating system assures in-line benchrest alignment of every bullet seated. The sliding sleeve vertically pre-aligns the bullet with the case-neck as they enter the die body. As the cartridge is raised, the bullet contacts the floating steel seating stem and is kept in perfect alignment as it's being seated. Every custom-grade new dimension die set comes in a convenient box which lets you store fully adjusted dies, lock-n-load bushings, shell holders an...

    • Brand: Hornady
    • ASIN: B000PD6PO2
    • UPC: 090255562286

  • Tipton 554428 Solid Brass Slotted Tip Gun Jag for Rifle/Handgun (Set of 4)

    For flooding the barrel with solvent or wiping the bore with oil or preservatives, nothing beats a patch in a Slotted Tip. Tipton offers an assortment of four caliber-range specific Rifle/Pistol tips for your convenience, or they can be purchased separately. Solid brass is softer than barrel steel so there is no worry of damaging your bore, plus they will last much longer than the typical synthetic plastic tips.

    • Brand: Tipton
    • ASIN: B0048KM8VC
    • UPC: 661120544289

  • FUNANASUN 2-Pack Bore Cleaner Snake Rifle Shotgun Gun Cleaning Kit for .22.223 Cal, 5.56mm&.38.357.380 Cal&9mm

    Features: This Bore Cleaner is easier to employ overall and there is much less risk of a risk of damaging your gun. You could quickly clean the bore from the chamber end as haven't to remove the lever and bolt. The Bore Cleaner Snake is also useful at hunt camp, when at day's end the ol' popper needs a quick de-skanking, or when you've been out in the rain and need to quickly dry the bore of your thunderstick. When your Bore Cleaner gets too nasty for your taste, just wash it up, let it dry, and you're ready to go again. Order your's today and be ready for hunting season! How to use a Bore Cleaner? 1. Apply a few drops of bore cleaner to the front of the Snake. 2. Drop the brass weight at the end of the Bore Cleaner's black pull cord through the breach at the rear of the barrel and then begin to feed the pull cord down the length of the barrel until the brass weight comes out the end. 3. Grasp the weight and pull it slightly until you can grasp the pull cord as well. 4. Wrap the pull cord around your dominant hand and then continue pulling so that the Bore Cleaner braided nylon floss sweeps through the entire barrel and pull out completely from the end. 5. Repeat the cleaning process as needed and then apply lubricant to the end of cord and pull it through the bore one last time ...

    • Color: .22 .223, 5.56mm &.38 .357 .380, 9mm
    • Brand: FUNANASUN
    • ASIN: B077857QNY
    • UPC: 613635853318

  • Redding Type S Match Die Set 223 Remington

    Contains the Type S Bushing Full Sizing Die and the Competition Seating Die.Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The Type S - Full Length Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding.- Uses the same interchangeable bushings as those used in our bushing style neck sizing dies.- The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desired.- Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case.The Redding Competition Seating Die has quickly established itself as the "state of the art" in straight line bullet seaters.- Tighter manufacturing tolerances have been made possible due to the details of the patented seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to "float" on a column of air. The seating stem is precision ground to exactly match bullet diameter. Alignment and accuracy are enhanced by the cartridge case and bullet being completely supported and aligned in a close fitting, precision ground sleeve before the bullet seating begins.

    • Brand: Redding Reloading
    • ASIN: B000GU6ZG2
    • UPC: 611760361111

  • Real Avid .223 Brush Combo- .223 Chamber Pads, Chamber Brush, Chamber Mop, and Bore Brush

    The .223 brush combo contains the critical components needed to keep the chamber and bore of your rifle carbon-free: - bore brush: scrubs baked-on carbon from lands and grooves - chamber brush: loosens carbon in the star chamber - chamber mop: collects loosened carbon in the chamber - chamber pads: threads onto the male end of any standard cleaning rod to collect left over carbon and apply oil or solvent to the chamber

    • Brand: Real Avid
    • ASIN: B01LWQK2L1
    • UPC: 813119012334

  • Hornady 043402 Zip Spindle Kit Straight Wall & Pistol

    The Hornady zip spindle kit is the ideal kit for updating your older Hornady sizing dies to utilize the new threaded spindle design. The zip spindle design on all full length size dies positively locks to eliminate slippage. A Series of light threads cut on both the spindle and spindle collet allows you to make incremental adjustments by turning the spindle or you can easily zip it up or down for larger movements. This kit includes a new threaded spindle and a threaded spindle collet. To install, remove the non-threaded spindle, collet, and expander ball from the existing die. Re-attach the existing expander ball to the new spindle, and install the threaded spindle and threaded collet. If the spindle on the expander die is already threaded, then this kit is not necessary.

    • Brand: Hornady
    • UPC: 090255434026

  • Tipton 777999 Rapid Deluxe Bore Guide Kit

    The Tipton Rapid Deluxe Bore Guide Kit contains several great tools that ensure safe, easy, and effective cleaning. The Rapid Deluxe Bore Guide allows you to easily align and secure a patch for solvent application, then holds it with the correct amount of tension for perfect jag penetration. When the rod is pushed into the rapid, it automatically releases the patch while also protecting your gun from harmful solvents. A bore guide will help protect the bore and action of your rifle by properly aligning the cleaning rod and reducing solvent overflow. Cleaning without a bore guide can allow the rod to "bow" and rub or gouge the chamber and throat of the bore, causing real damage and loss of accuracy. Keeping the rod properly aligned not only protects your barrel, but it also properly directs the force exerted on the cleaning rod handle, allowing tight patches to be pushed easily and safely.

    • Color: Black and Red
    • Brand: Tipton
    • ASIN: B0035LU0O2
    • UPC: 661120779995

  • Real Avid .223 Gun Boss - Compact .223 Caliber Cleaning kit with Gun Cleaning Rod, Chamber Cleaning Supplies, and More

    The Gun Boss 223 cleaning kit weighs just 11 ounces. Rod, brushes, picks, a slotted tip and additional accessories all fit into a rugged, weatherproof, zippered case with a digital camouflage exterior. Internal trays hold cleaning tools securely, so there’s no rattling. The kit includes: brass brush, phosphor bronze bristles. Six coated, threaded rod sections. Steel and phosphor bronze chamber brush. Nylon, slotted tip. Straight and angled metal cleaning picks. Bore illuminator/pin punch/safe chamber indicator. Bolt brush threaded to accept cleaning rod. 5 chamber cleaning pads. 25 synthetic cleaning patches. T-handle. EVA-molded case. No-rattle accessory trays.

    • Color: Original Version
    • Brand: Real Avid
    • ASIN: B00BD4X7QQ
    • UPC: 813119011405

  • BOOSTEADY Pro .223/5.56 AR15/M16/M4 Rifle Gun Cleaning Kit with Bore Chamber Brushes Cleaning Pick Kit, Brass Cleaning Rod in Zippered Organizer Compact Case

    Everything you need to clean your .223/5.56 AR15 and at a reasonable price. Great little set for the range or during travel for those after shooting quick cleanings.Product Features:Rod is made of durable brass. They are thicker than plastic rods and quite solid. 5 section brass cleaning rod is 33'' length total, long enough to clear the barrel. Stainless steel picks helps to clean stubborn areas on your firearm. Great way to remove the harmful materials from your gun. To keep your firearms performing at their best. The double-end nylon brush for trigger mechanisms and action areasThe chamber brush has stainless steel bristles for the locking lug area with brass bristles for the chamber. The bore brush is a standard brass brushZippered compact pouch keeps everything neatly organized space saving and easy accessPackage Incldes:5-Section Cleaning Rods1* T Handle2 * Bore Brushes2 * Champer Brushes1 * Double-end Nylon Brush1 * Metal Cleaning Pick1 * Patch Holder50* Patches1 * Zippered Pouch

    • Brand: BOOSTEADY
    • ASIN: B0746NTJCX