• 222 Buna-N O-Ring, 70A Durometer, Black, 1-1/2" ID, 1-3/4" OD, 1/8" Width (Pack of 100)

    This O-ring is made of black Buna-nitrile, is round in cross-section, has a durometer of 70A, and is designed for use in a wide variety of sealing applications. Buna-nitrile can have high tensile strength, and abrasion, tear, and compression set resistance. It can be used in temperatures between -30 degrees F (-34 degrees C) to 250 degrees F (121 degrees C), and is compatible for use with petroleum, HFA, HFB and HFC fluids, vegetable oil, alcohol, acids and aliphatic hydrocarbons. Buna-nitrile is vulnerable to acetone, ethers, esters, ozone, sunlight and weathering and should therefore not be used in ozone-generating electric motors, welding equipment, or in applications with exposure to UV light. This Buna O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation. O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section, and a hole in the center, similar to a doughnut. O-rings are available in var...

    • Color: Black
    • Brand: Sterling Seal & Supply, Inc. (STCC)
    • ASIN: B000FMYQ76

  • 222 Buna-N O-Ring, 50A Durometer, Round, Black, 1-1/2" ID, 1-3/4" OD, 1/8" Width (Pack of 20)

    This O-ring is made of black Buna-nitrile (Buna-N) and has a durometer of 50A. It has a round cross-section and can be used across a wide temperature range (-30 degrees F/-34 degrees C to 250 degrees F/121 degrees C). Designed for use in a wide variety of sealing applications, this Buna-nitrile O-ring meet standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings. Buna-nitrile can have high tensile strength, as well as abrasion, tear, and compression set resistance. It is compatible for use with petroleum, hexafluoroacetone (HFA), hexafluoro-2-butyne (HFB) and hydrofluorocarbon (HFC) fluids, vegetable oil, alcohol, acids, and aliphatic hydrocarbons. Buna-nitrile is vulnerable to acetone, ethers, esters, ozone, sunlight and weathering, and should not be used in ozone-generating electric motors, welding equipment, or in applications with exposure to UV light. The durometer hardness of this Buna O-ring is 50A. Durometers measure the hardness of a material and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation. On a scale of 0 to 100, a value of 0 indicates that a sample was completely penetrated, while a value of 100 shows no indentation in the sample. The letter following the number...

    • Color: Black
    • Brand: Sterling Seal & Supply, Inc. (STCC)
    • ASIN: B0051XXFVM

  • 222 Viton O-Ring, 75A Durometer, Black, 1-1/2" ID, 1-3/4" OD, 1/8" Width (Pack of 5)

    This Viton O-ring is black in color, round in shape, has a durometer (hardness) of 75A, and is designed for use in a wide variety of sealing applications. Viton has excellent heat, fuel, and chemical resistance. Viton is acceptable for temperature applications between -15 degrees F (-26 degrees C) to 400 degrees F (205 degrees C). It is compatible for use with non-flammable hydraulic fuels, silicone oil, chlorinated hydrocarbons (trichlorethylene), fuels, aromatic hydrocarbons (benzene) and aliphatic hydrocarbons (propane), as well as high vacuum environments, ozone, and weathering. Viton is vulnerable to low molecular organic acids, ammonia gas, alkalis, amines, glycol-based brake fluids, and super-heated steam. This Viton O-ring has a shore durometer of 75A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation. O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are a...

    • Color: Black
    • Brand: Sterling Seal & Supply, Inc. (STCC)
    • ASIN: B000FN0YG2

  • 222 Polyurethane O-Ring, 70A Durometer, Round, Translucent, 1-1/2" ID, 1-3/4" OD, 1/8" Width (Pack of 5)

    This O-ring is made of translucent polyurethane and has a durometer of 70A. It has a round cross-section and can be used across a wide temperature range (-60 degrees F/-51 degrees C to 212 degrees F/100 degrees C). Designed for use in a wide variety of sealing applications, this polyurethane O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings. Polyurethane is resistant to oil, weather, ozone , heat, electricity, abrasion, tearing and many chemicals. It performs well in low temperatures, but is not recommended for continuous use in high temperatures or with super-heated steam. The durometer hardness of this polyurethane O-ring is 70A. Durometers measure the hardness of a material and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation. On a scale of 0 to 100, a value of 0 indicates that a sample was completely penetrated, while a value of 100 shows no indentation in the sample. The letter following the number identifies the shore scale, which is either shore A or D. Shore A is used for softer plastics, while shore D is used for harder plastics. O-rings provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly see...

    • Color: Translucent
    • Brand: Sterling Seal & Supply, Inc. (STCC)
    • ASIN: B0053V34T0

  • 222 EPDM O-Ring, 70A Durometer, Black, 1-1/2" ID, 1-3/4" OD, 1/8" Width (Pack of 100)

    This EPDM O-ring is black in color, round in cross-section, has a durometer of 70A, and is designed for use in a wide variety of sealing applications. EPDM is acceptable for temperature applications between -70 degrees F (-57 degrees C) to 300 degrees F (149 degrees C). It is compatible for use with water and steam, silicone oil and grease, polar solvents (alcohols), acids, glycol-based brake fluids, ozone, and weathering. It is vulnerable to many oils, gasoline, and solvents. This material meets ASTM International standards. This EPDM O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation. O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in various sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter. This EPDM O-ring meets standards defined ...

    • Color: Black
    • Brand: Sterling Seal & Supply, Inc. (STCC)
    • ASIN: B001D8DSHK

  • 222 Viton O-Ring, 90A Durometer, Round, Black, 1-1/2" ID, 1-3/4" OD, 1/8" Width (Pack of 10)

    This O-ring is made of black Viton and has a durometer of 90A, a round cross-section, and can be used across a wide temperature range (-15 degrees F /-26 degrees C to 400 degrees F/ 205 degrees C). Designed for use in a wide variety of sealing applications, this Viton O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings. Viton (fluorocarbon elastomer) has heat, fuel, and chemical resistance and is compatible for use with non-flammable hydraulic fuels, silicone oil, chlorinated hydrocarbons (trichlorethylene), fuels, aromatic hydrocarbons (benzene) and aliphatic hydrocarbons (propane), as well as high vacuum environments, ozone, and weathering. Viton is vulnerable to low molecular organic acids, ammonia gas, alkalis, amines, glycol-based brake fluids, and super-heated steam. The durometer hardness of this Viton O-ring is 90A. Durometers measure the hardness of a material and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation. On a scale of 0 to 100, a value of 0 indicates that a sample was completely penetrated, while a value of 100 shows no indentation in the sample. The letter following the number identifies the shore scale, which is either shore A or D. Shore A ...

    • Color: Black
    • Brand: Sterling Seal & Supply, Inc. (STCC)
    • ASIN: B0051Y2FIU

  • 222 Silicone O-Ring, 70A Durometer, Red, 1-1/2" ID, 1-3/4" OD, 1/8" Width (Pack of 10)

    This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications. Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels. O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter. This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, ...

    • Color: Red
    • Brand: Small Parts
    • ASIN: B000FMYSVK

  • Captain O-Ring - Pentek, Pentair Water 151122 Replacement for OEM Size Big Blue O-Ring Buna-N ORing (3 Pack)

    This Pentek 151122 OR-100 O-ring is used to seal water filter housings. It has an inside diameter of 5-1/2" and outside diameter of just over 5-3/4 inches and is made of nitrile butadiene rubber (Buna-N) for flexibility and resistance to abrasion and tearing. The o-ring fits Pentek Big Blue filter housings, which are used in various applications, such as drinking water purification, swimming pools, industrial processes, and more. Compatible with the following filter housing models: Pentek #10 and #20 Big Blue opaque filter housings with 1" or 1-1/2" inlet/outlet connections APEC HBB-20/HBB-10 series (input sizes: 3/4", 1", 1.5"), HBC-20/HBC-10 series (input sizes: 3/4", 1", 1.5") Ace Hardware 49561 Ametek Kleen-Plus HD-10-R50, BBS American Plumber W10-PR, 152014, W2010-PR, 152015, W15-PR, 152016, W2015-PR, 152017, WWHC, 152022 Culligan HD-950, HD-950A Pentek 150237, 150239, 150469, BBFS-22, BBFS-222 The 151122 o-ring is a direct replacement for the following other part numbers: Ace Hardware 4001756 APEC O-RING-HB American Plumber 152032, W10-OR Ametek Kleen-Plus 151122-03 Culligan OR-100, 151122-27, 01019189 Pentek 151122, BB BUNA-N What to expect: This item includes three (3) O-Rings in a resealable zip-top poly bag with "Captain O-Ring" branded packaging. Manufactured and w...

    • Color: Black
    • Brand: Captain O-Ring LLC
    • ASIN: B019Y85PR6
    • UPC: 722589526046

  • 222 Viton O-Ring, 75A Durometer, Round, Brown, 1-1/2" ID, 1-3/4" OD, 1/8" Width (Pack of 25)

    This O-ring is made of brown Viton and has a durometer of 75A. It has a round cross-section and can be used across a wide temperature range (-15 degrees F/-26 degrees C to 400 degrees F/205 degrees C). Designed for use in a wide variety of sealing applications, this Viton O-ring meet standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings. Viton (fluorocarbon elastomer) has high heat, fuel, and chemical resistance, and is compatible for use with non-flammable hydraulic fuels, silicone oil, chlorinated hydrocarbons (trichlorethylene), fuels, aromatic hydrocarbons (benzene) and aliphatic hydrocarbons (propane), as well as high vacuum environments, ozone, and weathering. Viton is vulnerable to low molecular organic acids, ammonia gas, alkalis, amines, glycol-based brake fluids, and super-heated steam. The durometer hardness of this Viton O-ring is 75A. Durometers measure the hardness of a material and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation. On a scale of 0 to 100, a value of 0 indicates that a sample was completely penetrated, while a value of 100 shows no indentation in the sample. The letter following the number identifies the shore scale, which is either shore A or D....

    • Color: Brown
    • Brand: Sterling Seal & Supply, Inc. (STCC)
    • ASIN: B0051Y1BXU

  • Dupont KALREZ AS-568 222/1050LF Perfluoroelastomer O-Ring

    DuPont Kalrez 1050LF is a carbon black-filled product for O-rings, seals, and other parts used in chemical process industries. It has good hot water/steam, and excellent amine resistance. Kalrez 1050LF is not recommended for use in organic acids, or inorganic acids at high temperatures.

    • Brand: Kalrez
    • ASIN: B07B1MGJLD

  • 222 Silicone O-Ring, 70A Durometer, Red, 1-1/2" ID, 1-3/4" OD, 1/8" Width (Pack of 100)

    This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications. Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels. O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter. This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, ...

    • Color: Red
    • Brand: Small Parts
    • ASIN: B000FMUWMO

  • 222 O-Ring Seal Buna-N; 70A Durometer Hardness- (Pack of 10)- 1 1/2" ID X 1 3/4" OD X 1/8" CS

    Uses in Static applications and in Dynamic applications such as Pump Shafts and Hydraulic Cylinder Pistons where there is relative motion between parts and the o-ring. Are used on Automotive and Industrial machinery components, electronic instruments, electrical applicances, washroom facilities, faucets, etc. Our engineered o-ring compounds are designed to perform in a wide range of applications with varying chemical exposures, pressures and temperatures. Also replacement for Hayward SP-1491B Econo Union O-ring

    • Color: Black
    • Brand: EAI Parts
    • ASIN: B07FJ6NLMN
    • UPC: 646437903486

  • 222 Silicone O-Ring, 70A Durometer, Red, 1-1/2" ID, 1-3/4" OD, 1/8" Width (Pack of 5)

    This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications. Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels. O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter. This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, ...

    • Color: Red
    • Brand: Small Parts
    • ASIN: B000FMUWJM

  • M3x222 Buna-N O-Ring, 70A Durometer, Round, Black, Buna-N, 222 mm ID, 228 mm OD, 3 mm Width

    This metric O-ring is made of Buna-nitrile (also called Buna-N), round in cross-section, has a durometer of 70A, and is designed for use in a wide variety of sealing applications. Buna-nitrile can have high tensile strength, resistance to abrasion, tear, and compression set resistance. It is acceptable for temperature applications between -30 degrees F (-34 degrees C) to 250 degrees F (121 degrees C). It is compatible for use with petroleum, HFA, HFB, and HFC fluids, vegetable oil, alcohol, acids, and aliphatic hydrocarbons. Buna-nitrile is vulnerable to acetone, ethers, esters, ozone, sunlight, and weathering, and should therefore not be used in ozone-generating electric motors, welding equipment, or in applications with exposure to UV light. This O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation. O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves and cylinders of various sorts. They are circular in shape, with a round cross section and a hole in the center, si...

    • Color: Black
    • Brand: Small Parts
    • ASIN: B00NQW4BYA

  • 222 Buna O-Ring, 70A Durometer, Black, 1-1/2" ID, 1-3/4" OD, 1/8" Width (Pack of 25)

    This O-ring is made of black Buna-nitrile, is round in cross-section, has a durometer of 70A, and is designed for use in a wide variety of sealing applications. Buna-nitrile can have high tensile strength, and abrasion, tear, and compression set resistance. It can be used in temperatures between -30 degrees F (-34 degrees C) to 250 degrees F (121 degrees C), and is compatible for use with petroleum, HFA, HFB and HFC fluids, vegetable oil, alcohol, acids and aliphatic hydrocarbons. Buna-nitrile is vulnerable to acetone, ethers, esters, ozone, sunlight and weathering and should therefore not be used in ozone-generating electric motors, welding equipment, or in applications with exposure to UV light. This Buna O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation. O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section, and a hole in the center, similar to a doughnut. O-rings are available in var...

    • Color: Black
    • Brand: Small Parts
    • ASIN: B000FN0WPK

  • Sterling Seal ORSIL222x10 Number-222 Standard Silicone O-Ring has Excellent Resistance to Oxygen, Ozone and Sunlight, Vinyl Methyl Silicone, 70 Durometer Hardness, 1-1/2" ID, 1-3/4" OD (Pack of 10)

    Sterling Seal & Supply Silicone O-Rings are excellent seal materials for extreme temperature in static applications. Outstanding flex and fatigue life, very good for ozone and UV radiation, insulating properties, and physiologically neutral. ORSIL222x10

    • Color: Red
    • Brand: Sterling Seal & Supply, Inc. (STCC)
    • ASIN: B0188VTXOQ

  • The Hillman Group 56054 N70-222 Neoprene 'O' Ring, 1-3/4 x 1-1/2 x 1/8, 6-Pack

    O-rings are one of the simplest, yet most engineered, precise and useful seal designs ever developed. They are available in various metric and inch standard sizes. Sizes are specified by the inside diameter and the cross section diameter (thickness).

    • Brand: The Hillman Group
    • ASIN: B00MEWDE1O
    • UPC: 008236155624

  • M4x214 Buna-N O-Ring, 70A Durometer, Round, Black, Buna-N, 214 mm ID, 222 mm OD, 4 mm Width

    This metric O-ring is made of Buna-nitrile (also called Buna-N), round in cross-section, has a durometer of 70A, and is designed for use in a wide variety of sealing applications. Buna-nitrile can have high tensile strength, resistance to abrasion, tear, and compression set resistance. It is acceptable for temperature applications between -30 degrees F (-34 degrees C) to 250 degrees F (121 degrees C). It is compatible for use with petroleum, HFA, HFB, and HFC fluids, vegetable oil, alcohol, acids, and aliphatic hydrocarbons. Buna-nitrile is vulnerable to acetone, ethers, esters, ozone, sunlight, and weathering, and should therefore not be used in ozone-generating electric motors, welding equipment, or in applications with exposure to UV light. This O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation. O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves and cylinders of various sorts. They are circular in shape, with a round cross section and a hole in the center, si...

    • Color: Black
    • Brand: Small Parts
    • ASIN: B00NQVOJP2

  • 222 Aflas O-Ring, 80A Durometer, Round, Black, 1-1/2" ID, 1-3/4" OD, 1/8" Width (Pack of 6)

    This O-ring is made of black Aflas (fluoroelastomer) and has a durometer of 80A. It has a round cross-section and can be used across a wide temperature range (25 degrees F/-3.8 degrees C to 450 degrees F/232 degrees C). Designed for use in a wide variety of sealing applications, this Aflaz O-ring meet standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings. Aflas (fluoroelastomer) is resistant to oil, heat, electricity, abrasion and many chemicals including strong acids and bases. It is also performs well in all-weather, ozone, and steam applications, although it performs poorly in aromatic hydrocarbons or ketones. The durometer hardness of this Aflas O-ring is 80A. Durometers measure the hardness of a material and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation. On a scale of 0 to 100, a value of 0 indicates that a sample was completely penetrated, while a value of 100 shows no indentation in the sample. The letter following the number identifies the shore scale, which is either shore A or D. Shore A is used for softer plastics, while shore D is used for harder plastics. O-rings provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and ...

    • Color: Black
    • Brand: Sterling Seal & Supply, Inc. (STCC)
    • ASIN: B0053US6FS

  • Wolfride 222pcs Rubber Oring assortment kit 17 Universal Sizes O Ring Kit Washer Seal Assortment Set

    Wolfride 222pcs Rubber Oring assortment kit 17 Universal Sizes O Ring Kit Washer Seal Assortment SetThis package of 222 O-rings includes the following sizes:5/32" x 9/32"    20pc      9/16" x 3/4"     10pc      13/16" x 1-1/16"      8pc7/32" x 11/32"  22pc      5/8" x 13/16"   10pc      7/8" x 1-1/8"            8pc5/16" x 7/16"    22pc     11/16" x 7/8"    10pc      15/16" x 1-3/16"      8pc3/8" x 9/16"      20pc     3/4" x 15/16"    10pc      1-1/16" x 1-5/16"    8pc7/16" x 5/8"      20pc     3/4" x 1"           10pc      1-1/8" x 1-3/8"        8pc1/2" x 11/16"    20pc                                            1-3/16" x 1-7/16"    8pc 

    • Color: 222pcs
    • Brand: Wolfride
    • ASIN: B07RQWYRJN
    • UPC: 603935155137

  • Sterling Seal ORVT-650-382BRWX1 Brown Viton FKM 70/75 Durometer O-Ring Kit (Pack of 382)

    This Brown Viton O Ring set includes the following O-Rings: 20 pieces each for dash sizes 006, 007, 008, 009, 010, 011, and 012; 13 pieces each for dash sizes 110, 111, 112, 113, 114, 115, and 116; 10 pieces each for dash sizes 210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, and 222; 7 pieces each for dash sizes 325, 326, and 327 Deciding on what elastomer for your application can be difficult Choose Viton fluoroelastomer when you want an O-ring that’s compressible like Kalrez but will stand up to low temperatures Brown Viton “O” Rings by Sterling Seal & Supply resist boric and citric acids, ketones, hydrocarbons, and animal and vegetable oils Temperature range is -10° to 400° F Viton / FKM compounds are widely used in chemical, automotive, aerospace and industrial applications These compounds offer excellent chemical and temperature resistance Excellent resistance to acids, fuels, mineral and vegetable oils and greases, aliphatic, aromatic and chlorinated hydrocarbons, non-flammable hydraulic fluids (HFD) and many organic solvents and chemicals Low swelling in ASTM oil No 1, and IRM 902 and IRM 903 Excellent resistance to aging and ozone - Low gas permeability, low compression set VITON provides excellent resistance to a wide variety of chemicals, weather and...

    • Color: Box is Yellow, Red or black, O Rings are Brown
    • Brand: Sterling Seal & Supply, Inc. (STCC)
    • ASIN: B06Y4QCLMW

  • USA Sealing Inc Soft Silicone O-Ring-Dash 222-Pack of 10

    USA Sealing offers the broadest and deepest O-Ring selection in the market. We stay at the forefront of technology and polymer science and whether it is a standard, clean room, metal detectable, or medical grade application, we have the expertise to deliver a high quality product in a timely manner. Visit www.usasealing.com for more information.

    • Color: Red
    • Brand: USA Sealing Inc
    • ASIN: B07BHR8S5T
    • UPC: 193005248246