• RC 32P 5mm Pinion Gear Set 13T 14T 15T 16T 17T Tooth with Screwdriver for Traxxas Slash by MakerDoIt

    Q: Do you wanna make your 4wd scts or 1/8 buggies or losi rock rey or 8s xmaxx happier? A: We can help, we provide 5mm hole 32P pinion gear set comes with a set screw, they work well and have a secure fit with no modification needs. Package include: 1 X 32P 5mm 13T pinion gear 1 X 32P 5mm 14T pinion gear 1 X 32P 5mm 15T pinion gear 1 X 32P 5mm 16T pinion gear 1 X 32P 5mm 17T pinion gear 5 X 32P Screws 1 X Screwdriver Note: 💡Make sure you thread lock the grub screw. They are hard to find when they fall out. 💡Larger gears will result in higher speeds while smaller gears provide more torque. For quicker acceleration go for a smaller pinion gear (with fewer teeth) and a larger spur gear (with more teeth). Your car will accelerate off the mark very quickly with more torque, and you'll also benefit from cooler running temperatures, extending the life of your motor and ESC. 💡How to install the pinion gear: You will probably need to loosen the motor a bit, in order to fit the pinion gear on. Make sure you lock it in place on the flat portion of the motor shaft. When you are tightening it back up, make sure you leave about a gap between the pinion gear and the spur gear. That gap will be very small... It should be about the width of a piece of paper.

    • Color: Black
    • Brand: MakerDoIt
    • ASIN: B07GJPG2M9
    • UPC: 889838567844

  • RCRunning M0.6 3.175mm 13T 14T 15T 16T 17T Gear with Screw for 1/10 RC Motor by

    Specifications:M: 0.6Teeth: 13T 14T 15T 16T 17THeight: 9mmTip diameter13T: 9mm14T: 9.6mm15T: 10.2mm16T: 10.8mm17T: 11.4mmSuitable shaft diameter: 3.175mmPackage information:Package size: 9 * 5 * 1cm / 3.5 * 2.0 * 0.4inPackage weight: 10g / 0.4ozPolybag packagePackage Including1 * M0.6 3.175mm 13T Pinion Motor Gear1 * M0.6 3.175mm 14T Pinion Motor Gear1 * M0.6 3.175mm 15T Pinion Motor Gear1 * M0.6 3.175mm 16T Pinion Motor Gear1 * M0.6 3.175mm 17T Pinion Motor Gear

    • Color: As Shown
    • Brand: RCRunning
    • ASIN: B07BLWX2T2
    • UPC: 190033865070

  • Robinson Racing 1714 Hardened 14T Pinion Gear 32P

    The Robinson Racing Products team is dedicated to producing the finest gears and high-performance drive-related accessories available, from HARD-CORE racer to Week-End Warrior, we have you covered. All of our products are precision manufactured in the U.S.A. And have been proven on the track, off-road, and in countless back-yards so you can depend on them when it counts for maximum performance and maximum fun. We back up our confidence with more than 30 years of experience in manufacturing and racing hi-performance RC products.

    • Color: Brown/a
    • Brand: Robinson Racing Products
    • ASIN: B0046ESW9M
    • UPC: 885402229361

  • Traxxas 6488X 14-T Pinion Gear, 1.0 Metric Pitch, Fits 5Mm Shaft (Compatible with Steel Spur Gears) Vehicle

    Traxxas 6488X 14-t Pinion gear, 1.0 metric pitch, fits 5mm shaft (compatible with steel spur gears) use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

    • Brand: Traxxas
    • ASIN: B0716P6G27
    • UPC: 020334648891

  • Traxxas 32P Hardened Steel 5mm Pinion Gear Set 14T, 18T, 20T w/Set Screws Summit

    FEATURES////// Hardened steel ////14, 18 and 20 tooth gears ////32 pitch ////Fits 5mm shafts INCLUDES /////One 14T 32P Hardened Steel Pinion Gear /////One 4x3.5mm Set Screw /////One 18T 32P Hardened Steel Pinion Gear /////One 4x3.5mm Set Screw /////One 20T 32P Hardened Steel Pinion Gear /////One 4x3.5mm Set Screw

    • Brand: BOBBYRC
    • ASIN: B07CRSYDSW
    • UPC: 605483100775

  • Hot Racing HAG814 14t 48p Hard Anodized Aluminum Pinion Gear

    14 tooth/48 pitch Hard Anodized aluminum pinion gear from Hot Racing. FEATURES: 6061 Aluminum ConstructionShort ShankCNC Precision MachinedStamped w/number of teeth for easy identificationBeveled teeth edgeYOU WILL RECEIVE: One pinion gearOne pinion set screwREQUIREMENTS: Allen wrench or ball driver for mounting. SPECIFICATIONS: Teeth count: 14 teethTeeth pitch: 48 pitch width: 9.7mm (0.38")Inner diameter: 3.2mm (.125")COMMENTS: Can be used in most applications where a 48pitch pinion recommended. Hard Anodizing or Hardcoat is an electrochemically produced grey layer of hard aluminum oxide on the surface of aluminum components. . description revised by: KS October 30, 2012

    • Brand: Hot Racing
    • ASIN: B00A29AGSK
    • UPC: 083745355376

  • Integy RC Model Hop-ups C25888 Billet Machined 14T Pinion Gear for Traxxas LaTrax Rally 1/18 Scale

    Item C25888 Barcode: 91789021627

    • Brand: Integy
    • ASIN: B00XO845WE
    • UPC: 784029065621

  • Traxxas 5640 14-T Hardened Steel Pinion Gear for 5mm Shaft, 32P

    Gear, 14-T pinion (0.8 metric pitch, compatible with 32-pitch) / set screw. Optional Traxxas pinion gears allow you to increase or decrease the final drive ratio and tune for different applications. Larger gears will result in higher speeds while smaller gears provide more torque. These are designed for use with 32-pitch spur gears and 5mm motor shafts.

    • Brand: Traxxas
    • ASIN: B001SEVSN0
    • UPC: 020334564009

  • MakerDoIt 48p 13T 14T 15T 16T Pinion Gear Set with Screwdriver for 3.175mm Shaft Traxxas Redcat Tamiya Losi 1/10 RC Car

    Are you looking for universal upgrade pinion gear for your 1/10 RC car? Our 48p pinion gear set will be good addition to your RC car toolbox! And you will like the option of being able to change your gear ratio for different track conditions. With the screwdriver in the package, you can keep the screws tight on your motor shaft, affordable set to dial in your gearing. Package include: 1 X 13T 48p pinion gear 1 X 14T 48p pinion gear 1 X 15T 48p pinion gear 1 X 16T 48p pinion gear 4 X M3 screw

    • Color: Black
    • Brand: MakerDoIt
    • ASIN: B07FBWD2ZG
    • UPC: 889838566724

  • Traxxas Gear 14-T Pinion 48 Pitch, Set Screw TRA2427

    Traxxas 48 Pinion Gears are a great option for fine tuning the gearing of your 1/10 scale model. These gears feature a 3.17mm bore for fitment with motor shafts 3.17mm in diameter.

    • Brand: Traxxas
    • ASIN: B0163N1PCE
    • UPC: 783149612548

  • Axial AX30401 Heavy Duty HD Bevel Gear Set 36T/14T

    AX30401 Axial Optional Ratio Heavy Duty Gear Set: Higher Gear 36T/14TDifferent front and rear gear combinations can reduce torque twist in the rear and overdrive the front axle to help pull you through climbs easierOptional heavy duty dear sets offer improved gear mesh, reducing slop in the drive trainSpiral cut gears offer increased gear tooth contact and run quieterHardened steel for increased strength and additional weight in the axleOne set per axle requiredLaser etched markingsNote: For lower gear range, use AX30102 43T/13T

    • Brand: Axial
    • ASIN: B001QLEV1Q
    • UPC: 885315206060

  • ARRMA Pinion Gear 14T 48DP: Mega 4x4, ARAC7777

    AR310381 Pinion Gear 14T 48DP MEGA 4x4

    • Brand: ARRMA
    • ASIN: B077XNBZJF

  • Hot Racing NSG814 14t Steel 48p Pinion Gear 5mm or 1/8

    Optional 14 Tooth 48P Optional Steel Pinion Gear for 5mm shaftFEATURES: CNC Steel Gear then Nitride to increased wear resistance, improved fatigue life, and enhanced corrosion resistant BlackBlack Steel base construction with 4mm set screwLonger Base surface for maximum contactYOU WILL RECEIVE: One pinion gear One set screw 4x4mmOne 5mm to 1/8 conversion SleeveREQUIREMENTS: 2mm hex wrench to install the set screwSPECIFICATIONS: length: 14mm48 Pitch 14 toothCOMMENTS: This gear is designed for 5mm Shaft or 1/8 Shaftdescription revised by: WP June 10, 2014

    • Brand: Hot Racing
    • ASIN: B00A1E35DE

  • State Bicycle Fixed Gear/Fixie Bike Cog, Silver, 14T

    Fixed Gear bicycle cog. 14T / Tooth. 1/8th measurement. English threaded. This will fit all State Bicycle Co. wheels as well as many others. Please consult with a professional bicycle mechanic to ensure proper fit.

    • Color: Silver
    • Brand: State Bicycle Co.
    • ASIN: B00NUY077Y
    • UPC: 730669267123

  • 5Pcs 32DP 5mm 13T 14T 15T 16T 17T Motor Pinion Gear Combo Set for 1/10 RC Car Brushed Brushless Motor

    Teeth: 13T 14T 15T 16T 17TDiametral pitch: 32 DP13T size: ¢14 * 12mm14T size: ¢14 * 12.5mm15T size: ¢14 * 13mm16T size: ¢14 * 14mm17T size: ¢14 * 15mmSuitable shaft diameter: 5mmPackage size: 10 * 6 * 1.5cm / 4 * 2.4 * 0.6inPackage weight: 50g / 1.8ozAdhesive tape packagePackage Including1 * 32DP 13T Motor Pinion Gear1 * 32DP 14T Motor Pinion Gear1 * 32DP 14T Motor Pinion Gear1 * 32DP 16T Motor Pinion Gear1 * 32DP 17T Motor Pinion Gear

    • Color: As Shown
    • Brand: RCRunning
    • ASIN: B073ZFDFMM
    • UPC: 190657984911

  • GoolRC 32DP 3.175mm 12T 13T 14T 15T 16T Pinion Motor Gear Set for 1/10 RC Car Brushed Brushless Motor

    GoolRC 32DP 3.175mm 12T~16T Pinion Motor Gear for 1/10 RC Car Brushed Brushless Motor Features: Aluminum 7075 material They are available at stock in the long time The gears are milled by precisely Tanwai milling machine A M3 set screw(12.9 level)has been added to each pinion gear Hard anodized on the gear surface Suit 1/10 cars Specifications: Teeth: 12T,13T,14T,15T,16T, Diametral Pitch: 32 DP 12T Size: ¢10.7 * 14mm 13T Size: ¢11.7 * 14mm 14T Size: ¢12.4 * 14mm 15T Size: ¢13.4 * 14mm 16T Size: ¢14 * 14mm Suitable Shaft Diameter: 3.175mm Package Information: Package size: 10 * 6 * 1.5cm / 4 * 2.4 * 0.6in Package weight: 19g / 0.7oz Adhesive tape package Package List: 1 * 32DP 3.175mm 12T Pinion Motor Gear 1 * 32DP 3.175mm 13T Pinion Motor Gear 1 * 32DP 3.175mm 14T Pinion Motor Gear 1 * 32DP 3.175mm 15T Pinion Motor Gear 1 * 32DP 3.175mm 16T Pinion Motor Gear

    • Brand: GoolRC
    • ASIN: B01ABDQLVC
    • UPC: 602747258845

  • RCAWD Clutch Bell 14T Gear Flywheel Assembly Bearing Clutch Shoes Springs Cone Engine Nut D10201 for 1/8 RC Hobby Model Nitro Car HPI HSP Traxxas Axial Himoto 1set(Shipped Locally)(Red)

    Size: Bearing: 10 x 4 mm / 0.39 x 0.16 inch (Dia x Thickness) Flywheel: 34.4 x 17 mm/13.5 x 0.67 inch(Dia x H) Clutch gear:28 x 22 mm/ 1.1 x 0.87 inch (Dia x H) Clutch Shoes:20 x 10 x 7.5 mm/ 0.79 x 0.39 x 0.3 inch(L x W x H) Weight:47 g Package include: 1 x Flywheel 1 x Clutch gear 1 x Clutch Nut 3 x Clutch Shoes & springs 2 x Bearing 1 x Screw 1 x Round spacer(Just as photo showed)

    • Color: Red
    • Brand: RCAWD
    • ASIN: B01N02LR2L
    • UPC: 757290285999

  • RC 32P 3.175mm Pinion Gear Set 12T 13T 14T 15T 16T Tooth with Screwdriver for 1/10 1:10 RC Car Upgrade Aluminum Pinion Gear by MakerDoIt

    Q: Do you wanna make your 1/10 RC car happier? A: We can help, we provide 3.175mm hole 32P pinion gear set comes with a set screw, they work well and have a secure fit with no modification needs. Package include: 1 X 32P 3.175mm 12T pinion gear 1 X 32P 3.175mm 13T pinion gear 1 X 32P 3.175mm 14T pinion gear 1 X 32P 3.175mm 15T pinion gear 1 X 32P 3.175mm 16T pinion gear 5 X 32P Screws 1 X Screwdriver Note: 💡Make sure you thread lock the grub screw. They are hard to find when they fall out. 💡Larger gears will result in higher speeds while smaller gears provide more torque. For quicker acceleration go for a smaller pinion gear (with fewer teeth) and a larger spur gear (with more teeth). Your car will accelerate off the mark very quickly with more torque, and you'll also benefit from cooler running temperatures, extending the life of your motor and ESC. 💡How to install the pinion gear: You will probably need to loosen the motor a bit, in order to fit the pinion gear on. Make sure you lock it in place on the flat portion of the motor shaft. When you are tightening it back up, make sure you leave about a gap between the pinion gear and the spur gear. That gap will be very small... It should be about the width of a piece of paper.

    • Color: Chrome
    • Brand: MakerDoIt
    • ASIN: B07GJQ3D51
    • UPC: 889838567851

  • HobbyCrawler Clutch Bell Shoes Bearing 14T Gear Flywheel Assembly Kit Set Springs Cone Engine Nut for 1/8 RC Hobby Model Nitro Car HPI HSP Traxxas Axial Himoto (Red Color)

    Specification:Bearing: 10 x 4 mm / 0.39 x 0.16 inch (Dia x Thickness)Flywheel: 34.4 x 17 mm/13.5 x 0.67 inch(Dia x H)Clutch gear:28 x 22 mm/ 1.1 x 0.87 inch (Dia x H)Clutch Shoes:20 x 10 x 7.5 mm/ 0.79 x 0.39 x 0.3 inch(L x W x H)Package include:1 x Flywheel1 x Clutch gear1 x Clutch Nut3 x Clutch Shoes & springs2 x Bearing1 x Screw1 x Round spacer

    • Color: Red Color
    • Brand: HobbyCrawler
    • ASIN: B07Q5F18GD

  • Redcat Racing RC540 Motor with Gear, 14T

    Redcat Racing Part # 98060 RC540 motor with gear, 14T. Compatible with the following Redcat Racing vehicles: EVEREST-10. Redcat Racing is located in the United States and has a full staff of support personnel to help you with your Redcat Racing product. Consult your vehicle manual for correct fitment and assembly. Since 2005 Redcat has been your source for fast - affordable - fun!

    • Brand: Redcat Racing
    • ASIN: B00W5DHL52
    • UPC: 716080214212

  • ARRMA AR310475 14T Mod1 Typhon Kraton Pinion Gear

    AR310475 Pinion Gear 14T Mod1 Typhon Kraton, Standard pinion gear for the Arrma Typhon and Kraton Hardened steel construction. 14T Mod 1 Pinion Gear with 4x4mm Set Screw jxs 10/20/14 ir/jxs. This product is manufactured in China.

    • Brand: ARRMA
    • ASIN: B00NE0FOHM

  • 5M 14T Timing Belt Pulley Gear Synchronous Wheel 5-10mm Bore For 15/20mm Width Belt (tooth width:21mm, Bore:10mm)

    Specification:Material: Aluminum AlloyModel:5M14TTotal height:19/24mmTeeth outer diameter:21.14mmTooth shape: arc shapedFixing screw: M5*2Pitch:5mmWidth of teeth:16mm/21mm(fit for 15mm/20mm width belt)Teeth: 14Used widely in milling machine, CNC engine lathe, gear shaper, hobbing machine, drilling machine or other machinery transmission occassions.Quantity:1Package Includes:1Pcs

    • Color: Bore:10mm
    • Brand: HJZ-Drive
    • ASIN: B07SSBXV3M
    • UPC: 797645895237

  • Traxxas 7592 Gear, 14-T Pinion/Set Screw

    Gear, 14-t Pinion/ set screw this item is a genuine Traxxas spare part/accessory that is supplied in original retail packaging.

    • Brand: Traxxas
    • ASIN: B00EDL198Y
    • UPC: 020334759207

  • ALUM Pinion Gear 14T: GB01 TamTech

    Tamiya 40503 (OG-3) GB-01 Aluminum Pinion Gear (14T)

    • ASIN: B000FBOWLC