• Stainless 3/8-16 x 1-3/4" (3/4" to 3" Available) Socket Head Cap Screws, Full Thread, Hex Drive, Stainless Steel 18-8, Coarse Thread (3/8-16 x 1-3/4)

    All pictures represent actual product. Socket Cap Screws are reliable and durable and are used in many applications. With a high cylindrical head, socket cap head fasteners have a recessed driving area and offer high hold power at high torque levels. Socket head screws for use with hex or allen wrench. These screws are designed to go through a hole or nut that is pre-tapped to form a mating thread for that screw. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings. Length of the screw is measured under the head (part of screw that penetrates fastened material). Fully threaded shanks.

    • Brand: Chenango Supply
    • ASIN: B079H2P1F1

  • Stainless 3/8-16 x 2-1/4" (3/4" to 3" Available) Socket Button Head Cap Screws, Full Thread, Hex Drive, Stainless Steel 18-8, Coarse Thread (3/8-16 X 2-1/4)

    All pictures represent actual product. A button head socket cap screw is a screw with a button head and hexagon drive for tightening with an Allen-style wrench. This screw carries a recessed internal socket drive to add strength. The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. The material may be slightly magnetic. The button head is round with a low profile, short vertical sides and is suitable for light duty applications. The internal hex drive, also known as a hex-socket drive, has a hexagonal slot that requires an Allen key driver, also known as a hex key or Allen wrench. Socket cap screws are threaded fasteners that have a cap head with an internal socket drive for installing in areas with limited side clearance.

    • Brand: Chenango Supply
    • ASIN: B079H76NSM

  • Hard-to-Find Fastener 014973244347 Full Thread Hex Tap Bolts, 3/8-16 x 5, Piece-8

    We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.

    • Color: Zinc
    • Brand: Hard-to-Find Fastener
    • ASIN: B00L1L9GO8
    • UPC: 014973244347

  • 3/8"-16 x 3" Coarse Thread Socket Set Screw Cup Point Alloy Steel Black Oxide Pk 10

    PRODUCT SPECIFICATIONSPart #: 0000-117973Fastener Type: Socket Set Screw Cup PointSize Description: 3/8"-16 x 3"Diameter/Nominal Size: 3/8"Length: 3"Thread Pitch: 16Thread Pitch Type: CoarseThread Direction: RightSystem of Measurement: InchGrade: 170 KSI Alloy Steel (Grade 9)Material: Alloy SteelFinish: Thermal Black OxideDrive Type: Internal HexPoint Type: CupAverage Piece Weight: 0.0711000 lbs.Socket set screws, or grub screws, are commonly used to secure pulleys to shafts, socket set screws are generally headless and rest flush with or below the surface of the application. Set screws come in a variety of different points, cup point being the most common.

    • Brand: ASMC Industrial
    • ASIN: B07RRCBH3R

  • 3/8-16 x 1-1/4 Socket Head Cap Screws, Full Thread, Allen Socket Drive, Stainless Steel 18-8, Bright Finish, Quantity 10 Pieces by Fastenere

    Socket Cap Screws are reliable and durable and are used in many applications. They are available in a variety of head styles and materials. With a high cylindrical head, socket cap head fasteners have a recessed driving area and offer high hold power at high torque levels. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings. *****Disclaimer***** Picture is a representation of the product, for exact sizing please view the listing information for exact sizing. Partially Threaded screws may slightly vary in thread length based on manufacturer.

    • Brand: Fastenere
    • ASIN: B01A9EKL32
    • UPC: 842176103297

  • Sydien 6 Pcs Alloy Steel Hexagon Socket Head Shoulder Screw Bolt 1/2" Shoulder Dia 3/4" Shoulder Length 3/8"-16 UNC Thread

    Shoulder Screws reduce rotation through lockingAlloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart.Socket cap head fasteners are very common in industrial applications Drive system is a hexagon-shaped hole Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads.Shoulder Screws, also known as Shoulder Bolts, are used for several different applications, including those that involve rotation or require a locking type of screw. Shoulder Screws are distinct from other types of screws due to the fact that they are only partially threaded, leaving a smooth-sided round or square shaft between the threading and the head. This shaft is usually slightly larger than the threaded portion of the screw. Often used in automotive and mechanical applications.With a high cylindrical head, socket cap head fasteners have a recessed driving area and offer high hold power at high torque levels. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

    • Brand: Sydien
    • ASIN: B07K2ZW5QQ
    • UPC: 756171212680

  • Hard-to-Find Fastener 014973244224 Full Thread Hex Tap Bolts, 3/8-16 x 1-1/2, Piece-100

    We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.

    • Color: Zinc
    • Brand: Hard-to-Find Fastener
    • ASIN: B00L1L97WE
    • UPC: 014973244224

  • Hard-to-Find Fastener 014973244309 Full Thread Hex Tap Bolts, 3/8-16 x 3-1/2, Piece-50

    We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.

    • Color: Zinc
    • Brand: Hard-to-Find Fastener
    • ASIN: B00L1L7N34
    • UPC: 738287508222

  • Stainless 3/8-16 x 2-1/2" (3/4" to 3" Available) Socket Flat Head Screws, Full Thread, Hex Drive, Stainless Steel 18-8, Coarse Thread (3/8-16 x 2-1/2")

    All pictures represent actual product. The flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. Socket screws hexagon drive for tightening with an Allen-style wrench. This screw carries a recessed internal socket drive to add strength. The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. The material may be slightly magnetic. Flat socket cap screws are threaded fasteners that have a cap head with an internal socket drive for installing in areas with limited side clearance.

    • Brand: Chenango Supply
    • ASIN: B07D7FYRLR

  • 3/8-16 x 3-1/2 Socket Head Cap Screws, Partial Thread, Allen Socket Drive, Stainless Steel 18-8, Bright Finish, Quantity 5 Pieces by Fastenere

    Socket Cap Screws are reliable and durable and are used in many applications. They are available in a variety of head styles and materials. With a high cylindrical head, socket cap head fasteners have a recessed driving area and offer high hold power at high torque levels. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings. *****Disclaimer***** Picture is a representation of the product, for exact sizing please view the listing information for exact sizing. Partially Threaded screws may slightly vary in thread length based on manufacturer.

    • Brand: Fastenere
    • ASIN: B01A9EKRTA
    • UPC: 842176103389

  • 3/8-16 x 9" Carriage Bolts, Round Head, Square Neck, Stainless Steel 18-8, Partial Thread, Plain Finish, Flat Point, Quantity 5 by Fastenere

    A carriage bolt, coach bolt or round head square neck bolt is used through iron strengthening plates on either side of a wooden beam. It is commonplace though to use them on bare timber, the squared section giving enough grip to prevent rotation. Carriage bolts are extensively used in security fixings where the bolt must only be removable from one side. The smooth domed head and square neck below prevent the carriage bolt from being unlocked from the insecure side.

    • Brand: Fastenere
    • ASIN: B01FGBW71C
    • UPC: 842176120942

  • 3/8-16 x 3 Socket Head Cap Screws, Partial Thread, Allen Socket Drive, Stainless Steel 18-8, Bright Finish, Quantity 10 Pieces by Fastenere

    Socket Cap Screws are reliable and durable and are used in many applications. They are available in a variety of head styles and materials. With a high cylindrical head, socket cap head fasteners have a recessed driving area and offer high hold power at high torque levels. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings. *****Disclaimer***** Picture is a representation of the product, for exact sizing please view the listing information for exact sizing. Partially Threaded screws may slightly vary in thread length based on manufacturer.

    • Brand: Fastenere
    • ASIN: B01A9EKQFU
    • UPC: 842176103365

  • 3/8"-16 x 3" Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers, Grade A, Full Thread, Quantity 100 - by Fastener Depot, LLC

    Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way, where the square shoulder locks it firmly in place eliminating the need for a washer. Used whenever a smooth finish surface is needed so that nothing becomes snagged on the fastener. Galvanized finish allows for greater corrosion resistance.

    • Color: Silver/Grey
    • Brand: Fastener Depot
    • ASIN: B07RPRFRVT
    • UPC: 719279603309

  • 3/8-16 Serrated Flange Hex Lock Nuts, Stainless Steel 304, Bright Finish, Quantity 25

    Product Specification Flange Nuts have flat and serrated designs designed to act as an integrated, non-spinning washer, eliminating the need for a separate washer. Serrated flange nuts are fabricated with a built in serrated washer that resist loosening due to vibration. Flange Nut Size 3/8-16 High Quality Material 18-8 (304) Stainless Steel Inside Diameter 3/8 Inch Pitch Size 16 Threads per Inch (Coarse Thread) Package Included 25 x Serrated Flange Hex Lock Nuts 3/8-16 Warranty MewuDecor hardware has the highest quality on the market. Buy with confidence. Money back or exchange guarranteed.

    • Brand: MewuDecor
    • ASIN: B07MJVXWPR
    • UPC: 028753747010

  • DGQ 1.5 Inch Swivel Stem Casters Non-Marking Polyurethane Wheels 350 Lbs with Diameter 3/8"- 16 x 1" Stem Thread and Nuts,Pack of 4 (2xSwivel,2xLockable)

    Features: Black polyurethane wheel tire Double ball bearing swivel head Directional wheel Superior mechanical Quiet, Wear-resisting Shock absorption Would not scratch the floor Ideal for various uses and place Package Included: 2x Double Ball Bearing Swivel Casters2x Double Ball Bearing Swivel Casters with brake 4x 3/8"- 16 x 1" Hex Lock Nuts.

    • Color: 1.5"(2xswivel;2xlockable)
    • Brand: DGQ
    • ASIN: B07MTFFRY1

  • 3/8-16 x 3/4" Button Head Socket Cap Screws, Allen Socket Drive, Black Oxide, Alloy Steel, Fully Threaded, Machine Thread, Quantity 25

    Fastenere Button Head Socket Cap Screws Button Head Socket Cap Screws are commonly used in machine parts, die fixturing, and clamping. The socket head enables driving where there is not sufficient space for wrenches or sockets. Button socket cap screws offer a wider bearing surface and high tensile strength but are still low profile like other socket cap screws. Black Oxide, blackening, oxidizing, oxiding, black passivating, gun bluing . . . these terms all refer to the process of forming a black iron oxide on the surface of ferrous metals. Black oxide is a conversion coating formed by a chemical reaction produced when parts are immersed in the alkaline aqueous salt solution operated at approximately 285 degrees F. The reaction between the iron of the ferrous alloy and the hot oxide bath produces a magnitite (Fe3 O4) on the actual surface of the part. The black oxide process is a chemical conversion coating. This means that the black oxide is not deposited on the surface of the substrate like nickel or zinc electroplating. Instead, the black oxide coating is produced by a chemical reaction between the iron on the surface of the ferrous metal and the oxidizing salts present in the black oxide solution. These oxidizing salts include penetrates, catalysts, activators and p...

    • Brand: Fastenere
    • ASIN: B01I28XHRY
    • UPC: 842176122106

  • Hard-to-Find Fastener 014973244293 Full Thread Hex Tap Bolts, 3/8-16 x 3, Piece-50

    We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.

    • Color: Zinc
    • Brand: Hard-to-Find Fastener
    • ASIN: B00L1L9DWI
    • UPC: 738287010053

  • DICASAL 4 Pack 1.5 Inch Swivel Stem Casters, Non-Marking Polyurethane Wheels 330 Lbs with Diameter 3/8"- 16 x 1" Stem Thread and Nuts for Carts Trolley Furniture

    NOTE: THIS IS IMPERIAL SIZE, OUR STEM SIZE IS 3/8"- 16 x 1"THIS IS IMPERIAL SIZE, OUR STEM SIZE IS 3/8"- 16 x 1"THIS IS IMPERIAL SIZE, OUR STEM SIZE IS 3/8"- 16 x 1"THIS IS IMPERIAL SIZE, OUR STEM SIZE IS 3/8"- 16 x 1"THIS IS IMPERIAL SIZE, OUR STEM SIZE IS 3/8"- 16 x 1"DICASAL 4 Pack 1.5 Inch Swivel Stem Casters Why choose our DICASAL? DICASAL established in Feb, 2016, as a professional casters manufacturer, we are committed to providing our customers with high grade solutions, we use advanced equipment, and the latest technology for ensuring the longer life and flexibility of casters. NOTE: THIS IS IMPERIAL SIZE, our stem size into 3/8"- 16 x 1".Specifications: Brand Name: DICASAL Wheel Type: Screw Stem Casters Wheel Size: 1.5 inches Wheel Color: Black Material: Polyurethane and Steel Load bearing: 50KGS (each) Total Load Capacity: 150 KGS(Counting of 3) Wheel Type : 1.5" Black polyurethane, dual roller bearing Applicable industry: Automobile, mechanical industries, shipment carts etc. Dimension Details: Overall Height: 84mm/3.3 inch Overall Length: 94 mm/3.7 inch Wheel Diameter: 40mm/1.5 inch Wheel Width: 22.8mm/0.9 inchImperial Size Stem Size: 3/8"- 16 x 1" Installing Nuts Size: 3/8"- 16 x 1" Features: Black polyurethane wheel tire Double ball bearing swivel head Dir...

    • Color: Black
    • Brand: DICASAL
    • ASIN: B077P6Y7DG

  • (40) Full Thread 3/8-16 x 6" 307A Hex Head Tap Bolt Zinc Plated

    Lot of (40) hex head tap bolts. These 307A grade zinc plated bolts are 3/8-16 thread and are 6" in length with a full length thread and 9/16" hex.

    • Color: zinc
    • Brand: Lexar Industrial
    • ASIN: B07NTSJ47P

  • (675 pcs) 3/8"-16 X 1-1/2", Tap Bolts, Full Thread, Grade 8 Steel, Yellow Zinc

    Diameter (Nominal): 3/8"Thread Pitch: 16Length (Nominal): 1-1/2"Product Class: Externally Threaded FastenersOrder: Machine Thread FastenersCategory: Tap BoltsSystem of Measurement: US UnitsBrand: Aspen Fasteners®Head Style: Hex HeadDrive Style: External Hex DriveThread Length: Full ThreadThread Direction: Right-Hand ThreadMaterial: SteelMaterial Grade: Grade 8 SteelCoating: Zinc PlatedCoating Color: YellowStandards and Specifications: ASME B18.2.1 and SAE J429

    • Brand: ASPEN FASTENERS
    • ASIN: B01AWR6CDO